I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

EVA grips that are too large for blank
Posted by: Phil Richmond (---.tampabay.rr.com)
Date: December 11, 2004 08:07AM

I have some EVA grips (Old Clemens, etc), that were preformed to fit Fuji IPS seats and what not. Problem is that the ID of the foam is pretty big, and I'm pretty sure that for the length of the grip, no blank is big enough to fill in the whole gap. Has anyone else ever used these? What to build up the blank with? If you do it like a reel seat, then there will be soft spots in the grip I think. So solid mesh tape bushing all the way up the rear grip?

Using my daily quota of questions. :)

Phil

Options: ReplyQuote
Re: EVA grips that are too large for blank
Posted by: Steve Loper (---.proxy.aol.com)
Date: December 11, 2004 08:34AM

FiberGlass Tape works well

Options: ReplyQuote
Re: EVA grips that are too large for blank
Posted by: Mike Barkley (---.nap.wideopenwest.com)
Date: December 11, 2004 09:21AM

I had the same question awhile ago and Tom K. suggested spraling twine up and down the blank where the seat will go. I have done it a few times and it works !

Mike

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster