SPONSORS
2024 ICRBE EXPO |
Two piece spinning rod
Posted by:
Mike Kosiba
(163.206.192.---)
Date: March 06, 2002 12:23PM
During test casting and guide placement via static distribution test does the ferrule need to be wrapped on 2 piece graphite spinning rods? Re: Two piece spinning rod
Posted by:
Tom Kirkman
(---.dialsprint.net)
Date: March 06, 2002 01:48PM
To be safe, yes. Not saying you'll break one if you don't, but it only takes a minute and is probably wise. .............. Re: Two piece spinning rod
Posted by:
Harold Tanner
(---.xtalwind.net)
Date: March 07, 2002 06:05AM
I don't mean to stretch the point made by Tom, but by all means wrap the ferrule before you put any stress on the rod. It has to be done anyway and might avert a problem. It does not have to be finished and could be re-wrapped later but it will certainly prevent a possible crack. This would be especially true on a fly rod. Capt. Harold Sorry, only registered users may post in this forum.
|