SPONSORS
2024 ICRBE EXPO |
Coating with different epoxies?
Posted by:
Daniel W. Colville
(136.183.145.---)
Date: December 02, 2004 01:20PM
Hey guys...Hope everyone is doing well. I was curious if i could use flex coat light for the first layer and use high build for the next couple coats? Sincerely, Dan Colville Re: Coating with different epoxies?
Posted by:
Tom Kirkman
(---.152.54.52.Dial1.Atlanta1.Level3.net)
Date: December 02, 2004 01:26PM
Yes, it should work just fine. .......... Re: Coating with different epoxies?
Posted by:
Jesse Buky
(---.exis.net)
Date: December 02, 2004 02:08PM
No problem, I have two Flexcoat Gallon Dispensers here in the shop and use Lite for the first coat and Regular for the second coat. The hardner is the same for both and you can mix the two together with no bad effects. I have another gallon dispenser at home with a static mixer on it that I use for casting my encapsulated grips and once in a while will use Lite but most of the time use Regular, same thing though, just mix one with the other with no ill effects. Jesse Sorry, only registered users may post in this forum.
|