SPONSORS
2024 ICRBE EXPO |
St Croix Guide Spacing
Posted by:
Gordon Wilson
(---.as15444.net)
Date: November 29, 2004 07:06AM
I've got my hands on a St Croix SV4 blank – 9’ #4 4pc – model number 4F904.4. I am wondering if anyone can advise on the correct guide spacing. Thanks Gordon Wilson Re: St Croix Guide Spacing
Posted by:
Ron Hossack
(---.pimaco01.az.comcast.net)
Date: November 29, 2004 07:36AM
Gordon Wilson wrote: > I've got my hands on a St Croix SV4 blank – 9’ #4 4pc – model > number 4F904.4. I am wondering if anyone can advise on the > correct guide spacing. Gordon, here you will find the info you need: [www.stcroixrods.com] 4F904.4 TROUT U904.4 9'0" 4 FAST 4WT. 0.335 4.0 They recommend guides sizes: 12-10-4-4-4-4-3-3-3-3-3 sm.kpr with a tip of 4.0 ... the guides are light single foot. There is a wealth of info on the St. Croix site Re: St Croix Guide Spacing
Posted by:
Art Parramoure
(---.159.20.194.Dial1.Chicago1.Level3.net)
Date: November 29, 2004 08:31AM
If you call or write to St.Croix they will send you a rod builders catalog that has all their guide spacings for most all their rods. Phone : (715) 762-3226 , (800) 826-7042 , address: 856 4th Avenue North P.O. Box 279 Park Falls, Wi. 54552 Tight lines, Art mrparramoure@yahoo.com Re: St Croix Guide Spacing
Posted by:
Bill Moschler
(---.ag.utk.edu)
Date: November 29, 2004 11:46AM
St. Croix has the spacings on their website. Re: St Croix Guide Spacing
Posted by:
Spencer Phipps
(---.client.comcast.net)
Date: November 29, 2004 07:34PM
Gordon, Once you gotten the guides on you are not done, if you want the best rod it can be, until you've done a static distribution test. An article on this test is in the above library section. Sorry, only registered users may post in this forum.
|