I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Machine Shop
Posted by: Mike McGivney (---.jdover01.nj.comcast.net)
Date: November 28, 2004 08:43PM

Anyone know a good machine shop in Ocean County NJ? Probably a long shot, but figured I'd ask.I need a sleeve made with set screws to attach my sewing machine motor directly to a chuck without pulleys. Thanks

Options: ReplyQuote
Re: Machine Shop
Posted by: Jeff Fultz (---.client.comcast.net)
Date: November 28, 2004 09:10PM

Mike,

If you let me know the dimensions you need, I can make a coupling sleeve for you out of stainless steel, aluminum, brass,etc... This is just one of the many reasons I got a metal working lathe for my rod shop.

Options: ReplyQuote
Re: Machine Shop
Posted by: Mike McGivney (---.jdover01.nj.comcast.net)
Date: November 28, 2004 10:43PM

Thanks Jeff. I'll get the measurements together and send you an e-mail. Thanks again

Options: ReplyQuote
Re: Machine Shop
Posted by: Robert Tignor (---.va.client2.attbi.com)
Date: November 28, 2004 11:06PM

This is great one rodbuilder helping out another. Thats what this site is all about anyway.Where else can you go to get your questions answered and make friends at the same time .What a deal.


Options: ReplyQuote
Re: Machine Shop
Posted by: Dennis J. Danku (---.proxy.aol.com)
Date: December 01, 2004 12:16PM

Hello Mike, I have one I could send you that I made a few years ago for a Rod Smith to fit a PAC- BAY chuck. I think its 1/4 X 1/4 ID aluminum W/ set screws. Just E-Mail me. No charge, I have extras.
Dennis

Options: ReplyQuote
Re: Machine Shop
Posted by: Dennis J. Danku (---.proxy.aol.com)
Date: December 01, 2004 12:37PM

Mike, The exact measurements are 0.313 X 0.243 ID X 2" long X 1/2" Dia. If this is what you need, e-mail me. I'm in NJ also. Dennis

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster