SPONSORS
2024 ICRBE EXPO |
Finding spine on telescopic blank
Posted by:
Kirk Eaton
(---.sta.sprint-hsd.net)
Date: November 19, 2004 02:36PM
I want to build myself a pitchin' rod and was wondering how I would find the spine on a 7'6" telescopic blank? Thanks for any and all help. Bass wishes! Re: Finding spine on telescopic blank
Posted by:
Michael Sledden
(---.dsl.emhril.ameritech.net)
Date: November 19, 2004 02:47PM
The last one I did for myself, not sure if this the best, but I found it on the just the long portion of the blank, did not take into account the short section for the handle. Re: Finding spine on telescopic blank
Posted by:
Chris Catignani
(---.vitalchek.com)
Date: November 19, 2004 03:27PM
You dont need to find it on the short piece. Re: Finding spine on telescopic blank
Posted by:
Tom Kirkman
(---.152.54.187.Dial1.Atlanta1.Level3.net)
Date: November 19, 2004 03:30PM
Slide the long section out of the short handle piece and locate the spine on the long forward section. Then slide the section back through the short handle piece and build as usual. ...... Re: Finding spine on telescopic blank
Posted by:
Bob Balcombe
(---.rb.gh.centurytel.net)
Date: November 19, 2004 04:31PM
I am sure you would do it just like a 4 pcs. pack rod. Good Wraps Bob Sorry, only registered users may post in this forum.
|