SPONSORS
2024 ICRBE EXPO |
Syringes
Posted by:
Carrington Tate
(---.wellsfargo.com)
Date: November 08, 2004 12:24PM
Good morning all, After installing a thin walled cork handle to a blank using masking tape arbors, i noticed a soft spot in the cork where it gives under pressure. I was thinking i would inject some epoxy into the void. Where do i find syringes for this application, and/or is there a better way? Thanks Carrington Tate Re: Syringes
Posted by:
Christian Brink
(---.dsl.aracnet.com)
Date: November 08, 2004 01:19PM
Most woodworking stores carry these. Off the top of my head: Lee Valley - Veritas Woodcraft Woodworking Supply Basically anything above a HD or Lowes, but you may find them there (my local home improvment stores do not carry them). HTH, Christian Re: Syringes
Posted by:
Carrington Tate
(---.wellsfargo.com)
Date: November 08, 2004 06:48PM
thanks for the response christian, i'll check it out. Carrington Sorry, only registered users may post in this forum.
|