SPONSORS
2024 ICRBE EXPO |
Rogue SJ702, did I get the right blank?
Posted by:
William White
(---.columbus.rr.com)
Date: November 02, 2004 07:14PM
I ordered and just received a Rogue SJ702 blank. I'm a bit confused as the advertised but diameter for this blank is .629 inches but the blank I received has a blank diameter of only .585 inches. It came in a sealed sleeve with what appears to be (first Rogue blank I've ever bought) the correct header card and decal. Anyone know of a way I can confirm this as being the right blank? Thanks. Re: Rogue SJ702, did I get the right blank?
Posted by:
Mike Williams
(---.ipt.aol.com)
Date: November 02, 2004 07:50PM
You would have to call or write to Rogue and ask them. The specs and your blank sound way off to me but sometimes companies make running changes in a blank model. I'd call or e-mail Rogue and ask them. Re: Rogue SJ702, did I get the right blank?
Posted by:
Mike Naylor
(---.state.md.us)
Date: November 03, 2004 07:44AM
I have two of these at home, I will check tonight and see what mine are. I've made several of this particular model already, and they are VERY large at the butt. Re: Rogue SJ702, did I get the right blank?
Posted by:
KEITH BURNETTE
(---.roa.east.verizon.net)
Date: November 03, 2004 04:40PM
I HAVE TWO OF THEM IN MY SHOP AND BOTH MEASURE .485 ON THE BUTT. THEY ARE VERY GOOD BLANKS. ROGUES ARE MY FAVORITE FOR BASS RODS. I USE THE MB664 AND 663 AND 702 703 704 . Re: Rogue SJ702, did I get the right blank?
Posted by:
KEITH BURNETTE
(---.roa.east.verizon.net)
Date: November 03, 2004 04:45PM
I LOOKED IN MERRICK'S CATALOG AND IT SAYS BUT DIA. FOR SJ702 IS .477 I THINK IT MAY NOT BE AN EXACT SCIENCE. Re: Rogue SJ702, did I get the right blank?
Posted by:
William Colby
(---.ipt.aol.com)
Date: November 03, 2004 07:08PM
.485 and .477 is close enough. These things are made by hand and can vary slightly. You can expect them to be off by a little, but not a quarter inch. If we're talking about a 1/32 to 1/16th you can chalk that up to manufacturing variances. Re: Rogue SJ702, did I get the right blank?
Posted by:
Bryan Plenzler
(---.dialsprint.net)
Date: November 04, 2004 09:01AM
I think the original SJ 702 from years ago had a butt diameter of around .600. There evidenlty has been an inline change since the last 6 I've built have all been in that .477-.485 range. William White and Mike Naylor-- where did you get the 702's with the large butt diameter? Just curious since the old blanks had a different action than the new ones. Re: Rogue SJ702, did I get the right blank?
Posted by:
Mike Naylor
(---.state.md.us)
Date: November 04, 2004 09:45AM
I purchased all of mine from Merrick. Totally forgot to check my diameters last night though.. Will try to remember to check tonight. Re: Rogue SJ702, did I get the right blank?
Posted by:
William White
(---.ehs.ohio-state.edu)
Date: November 04, 2004 03:53PM
I actually mistyped on my original post. The butt diameter measures .485, so from what Bryan is saying I probably have the right blank. I was using a Janns catalog to look at specs and they list it as .629. After Keith posted I looked around a little harder and found two other sources listing it at .477 also. Live and learn I guess as I much prefer fast to extra-fast action blanks and while being fast, this blank seems to be more towards the slower end of fast. I suppose I'll put it on @#$%& or on the sell/trade board here. Thanks for the replies everyone. Re: Rogue SJ702, did I get the right blank?
Posted by:
Mike Naylor
(---.tnt36.dca5.da.uu.net)
Date: November 04, 2004 08:34PM
OK, I measured my two. One is .476," the other is .478." This is not a super-fast blank. If you want fast, get the SJ704. It's much stiffer than the 702. I prefer the 703 myself. Sorry, only registered users may post in this forum.
|