SPONSORS
2024 ICRBE EXPO |
Guide layout
Posted by:
Wayne Hofer
(---.client.attbi.com)
Date: February 20, 2002 02:20PM
I am about to build a 9' , 2 pc. 4 wt. GLX. Got a good deal on the blank. For the guide set up I am planing to outfit with Fuji Ti/SiC Concept guides: 1 ea. #12 double foot stripper, 1 ea. #10 single foot (SF), 1 ea. #8 SF, 1-2 ea. #7 SF, and finish out with 5-6 ea. #6 SF guides plus the tip top. I may experiment with the extra guide 4 in. from the stripper, but not sure it makes much difference on a 4 wt. rod. Am I on track? Thanks .. Wayne Re: Guide layout
Posted by:
Tom Kirkman
(---.dialsprint.net)
Date: February 20, 2002 03:13PM
Probably, but again, only your blank and own tests can tell you for sure. Overall, I'd say you've mentioned a pretty safe set-up. For the sake of testing, try this set-up out as well: spinning type #12, spinning type #10, low frame fly type 8, then 6's all the way out to the tip top. You could then try the additional stripper on that set-up as well. .................. Sorry, only registered users may post in this forum.
|