SPONSORS
2024 ICRBE EXPO |
Stripper guide placement
Posted by:
Mike Canavan
(---.stny.rr.com)
Date: February 19, 2002 10:51AM
Using two stripping guides for a 9' 5wt flyrod, and wondered (based on some previous posts) if the second stripper should be close (4-6") to the first stripper, or should it be moved according to a guide/line distribution test (spaced-out) like the rest of the guides? Thanks! Mike Re: Stripper guide placement
Posted by:
Tom Kirkman
(---.dialsprint.net)
Date: February 19, 2002 12:21PM
No, if you place it according to a static distribution test it won't likely locate in that area. Just try it about 3.5 to 4 inches past your first stripper and see what you think. It may look odd, but if your casting distance improves it suddenly looks a lot better. .................... Re: Stripper guide placement
Posted by:
Mike Canavan
(---.clarityconnect.net)
Date: February 19, 2002 03:09PM
Thanks Tom, I'll give it a shot at about 4" or so from the first stripper. I really appreciate your help and learning from this site! Mike Sorry, only registered users may post in this forum.
|