SPONSORS
2024 ICRBE EXPO |
Results 31 - 36 of 36
13 years ago
Mike Wiles
How about a senko blank recommendation under $100?
I like to fish them weightless.
Mikew
Forum: rodboard 13 years ago
Mike Wiles
OK, here is one solution -
Take the BassPro but cap apart and cut off the threaded rod right at the base. A Dremel tool works good.
Buy 1/4" Teenuts and T-bolts. You can get them from Woodcraft.
Epoxy the T-Bolt in the Bass Pro But cap and epoxy the Teenuts into the end of your rod blank.
You can use the same weights from the BassPro but cap.
Now you have the opportunity to balance
Forum: rodboard 14 years ago
Mike Wiles
Hi Roger,
I think I would like to have a hollow tube for inserting hand warmers... so the arbors will not work.
Thanks for your ideas and response.
Mikew
Hi Steve,
I have glued the Tex. handle twice and since it looks like it will not work without the arbor or a lot of extra work I am willing to try something else.
I have constructed some of the handles using the foam core and f
Forum: rodboard 14 years ago
Mike Wiles
Hi Steve,
I would like to leave the tubing open like the hot handled rod. I live in Texas and we do fish in the
winter time especially the lakes that are heated by power plants.
Yes, The only support is the glue joint. No arbors... I think the rod will be more sensitive with the rod glued directly to the tube.
I might use some kid of but cap to protect the but end of the rod.
You are s
Forum: rodboard 14 years ago
Mike Wiles
Hi Guys,
I used Threadmaster Ultimate Epoxy gel to attach the rod blank to the Texalium tube..
The joint between the tube and the rod blank is very smooth and covers about 30% of the blank surface. It is not a very large diameter blank
and the glue is only on one side covering about 30% of the total surface of the rob blank at the but.
I do think there is some sort of release agent insi
Forum: rodboard 14 years ago
Mike Wiles
Hi Guys,
I am trying to epoxy a rod blank directly to a Texalium Tennessee Handle Tube. I am having a problem getting
the epoxy to bond to inside of the Texalium tube. I cleaned the inside of the tube with Alcohol and sanded it some
with 400 grit stand paper. However, the bond turned completely loose. I have a blank with a very nice epoxy blob but
it is not stuck to the Texalium... I had t
Forum: rodboard |