SPONSORS
2024 ICRBE EXPO |
Results 31 - 38 of 38
10 years ago
Jack Justis
This photo was featured in the firt edition of "Blue Book of Pool Cues" by Brad Simpson in the early 80's. The cues were wrapped for Mr. Victor Stein of NYC
Forum: rodboard 7 years ago
Jack Justis
Bob McKamey Wrote:
-------------------------------------------------------
> Every Angler has their take on casting or just
> fishing in general. For me, in the world of Bass
> Fishing, when I want to make more accurate casts,
> I turn to a extra-fast tip flex MHX Rod Blank. In
> this situation, I am not worried about distance,
> rather the pin-point accuracy the extra
Forum: rodboard 11 years ago
Jack Justis
33. Joy Dunlap
I would appreciate any contact info on Joy Dunlap.
Thanks,
Jack
Forum: rodboard 17 years ago
Jack Justis
34. Re: Finish help
It's a little late to tell you now, but never under any circumstances wet sand a finish over a wrap. The nubs or even bubbles can be sliced off with a new single edge razor blade. I would also be careful using a tack cloth as it can leave a residue that will react with just about any finish. I used to use a piece of masking tape to pick up whatever I could see on the wrap and never had a problem
Forum: rodboard 17 years ago
Jack Justis
Anyone interested is seeing a photo of the Ruby Guides, send email to JJustis4@aol.com.
Forum: rodboard 17 years ago
Jack Justis
Ernie Johnson Wrote:
-------------------------------------------------------
> Jack
>
> Great stuff. How come you got out of Rod
> Building?
>
> Keep posting those pics..
Hi Ernie,
I suppose you could say I was eating, living and drinking rod building and simply got burned out. After looking at the photos and thinking back I had forgotten that I had built than ma
Forum: rodboard 17 years ago
Jack Justis
Bill Stevens Wrote:
-------------------------------------------------------
> Jack thanks for sharing. What kind off finish
> were you using for these rods - the whites and
> light colors are absolutely clear. These rods look
> better than ones I did six months ago from a
> yellowing standpoint.
Hi Bill,
I used a variety of finishes and over time I think I tried just a
Forum: rodboard 17 years ago
Jack Justis
Hey Guys,
Thanks a lot for the very kind words. Even though I don't plan on making any more rods, I still have a spot in my heart for it. I will be posting some more pics from an old album so check the photo section when you have time.
Best regards,
Jack Justis
Forum: rodboard |