SPONSORS
2024 ICRBE EXPO |
Results 31 - 55 of 55
11 years ago
Ron Jack
I have two rod blanks that I purchased several years ago. Decided it was time to build myself new rods. Got handles, reelseat, and foregrips glued on and then realized that I was missing a couple guides and had the wrong tip top for one of the blanks. The guides that I had bought were something new that I wanted to try - so I didn't have any spares. I called Lance on Friday afternoon - he was
Forum: rodboard 11 years ago
Ron Jack
33. Re: CCS Data
Greg, Could you e mail me a copy also.
Thank you,
Forum: rodboard 12 years ago
Ron Jack
I have just finished two Rainshadow SWT70H-3 and two SWT70MH-3. These are awesome blanks -
Forum: rodboard 12 years ago
Ron Jack
I am building a Rainshadow XF909-4 fly rod. I am going to use size 6 single foot alconite running guides. I have size 16, 12, 10, and 8 double foot guides. What would be the better choice for the first two stripper guides? 16 - 12 - 6? 16 - 10 - 6? I am having a senior moment.
Thanks in advance for your help.
Ron Jack
Forum: rodboard 12 years ago
Ron Jack
11, 14, 21 they are all well done - having never done a wrap, I am blown away.
Forum: rodboard 12 years ago
Ron Jack
I am building another Batson ISA 1086 F 9' 12~25 lb, 3/4 ~ 11/2 oz salmon rod. Will be using a Shimano Chronark CH 101BSV reel. I have never used micro's but would like to try. Am thinking of using Fuji K series guides - 5.5mm butt - 5mm - and 3.5mm to tip. Would this set up be strong enough for King Salmon? Any and all comments welcome. thank you in advance.
Ron Jack
Forum: rodboard 12 years ago
Ron Jack
I am building a Batson 1086 salmon rod and have put a King Salmon decal on it and the rod decal. The blank is a dark gray - should I put CP on the decals or not before the finish? Thanks for any input.
Ron Jack
Forum: rodboard 13 years ago
Ron Jack
39. Re: Expo Boost!
I just booked my room at the Econolodge as I have stayed there the last couple of years. They are starting to get a lot of calls. So if interested, book early.
Ron Jack
Bowdoin, ME
Forum: rodboard 14 years ago
Ron Jack
40. URRS
In following the thread on the difference between casting and spinning blanks, it was mentioned that the URRS would give you the info. This is the first time that I have seen/heard this term??? Can someone explain what this is/does??
Thank you in advance,
Ron Jack
Forum: rodboard 16 years ago
Ron Jack
41. Re: Weather
Tom, I attended this event last year for the first time and made my plans early for this years show. I was looking forward to meeting Doc Ski and others that I met last year. My flight form Maine was cancelled and the airline was unable to get me there. I had to call the Radison Friday night to cancel my room. I walked around all week-end just sick that I couldn't attend. Wait until next ye
Forum: rodboard 16 years ago
Ron Jack
Billy.
I have never built a salmon spiral wrap rod before and I'm certainly learning alot. Can I enter where I have already started to build the rod??
Forum: rodboard 16 years ago
Ron Jack
After building fly rods, I decided to try my hand at a spiral wrap salmon rod. The blank is a Rainshadow ISA 1086 F 9' 2 piece. I have a 14" butt grip - Fuji 18 trigger realseat - 4" fore grip. After doing a search of this board, reading and re-reading the Static Guide Placement, reading RodMaker vol 8 - Issue 2, I thought that I had a pretty good handle on this (the key word here is
Forum: rodboard 17 years ago
Ron Jack
Thanks for your suggestions. I went to Sears and they didn't have anything that would work in the store, so I ordered one from Grizzly. Again thanks for your help.
This board is the GREATEST!!!!!!!!!!
Forum: rodboard 17 years ago
Ron Jack
The problem that I am having is to find a drill that has the piece of housing in front of the chuck. Sorry that I was not clear on that.
What make drill do you use?
Forum: rodboard 17 years ago
Ron Jack
I have a Grizzly Hobby Wood lathe and am having trouble finding a drill, either electric or cordless, that has a front piece that doesn't turn to go into the holder. The holder has a 43 mm diameter. Does anyone have a suggestion??
Thanks in advance
Ron
Forum: rodboard 17 years ago
Ron Jack
Jimmy, Volume 10, Issue 1, page 22 of the RodMaker magazine has a great article on how to build a Tennessee handle.
Ron
Forum: rodboard 17 years ago
Ron Jack
Scott, It was great to meet you and I thank you so much for offering me the chance to sit down- look over your shoulder - and have you explain the weave to me. I have never done any weaving but thanks to you I will. Again my sincere thanks.
Ron Jack
Forum: rodboard 17 years ago
Ron Jack
52. G - Loomis Blank
The first rod that I made was a 9' 2 piece F 1086 G - Loomis IM 6 flyrod. I really enjoyed fishing with this rod until one day (my own stupidy) being in a hurry, instead of properly putting the rod away in its case, I placed it in the back seat of my vehicle. You guessed it - I had to open the back door to get something out and when I closed the door, I shortened the butt section up about 2&quo
Forum: rodboard 17 years ago
Ron Jack
53. Re: RodMaker CD
Tom doesn't have any copies of the first two issues of volume one. Is there anyone who has a copy of the first two issues that would be willing to lone them to Tom or to copy them (if Tom doesn't mind) and send the copies to tom? It would be great to be able to have volome one on CD for all.
Thank you in advance -
Ron Jack
Bowdoin, Maine
Forum: rodboard 17 years ago
Ron Jack
Emory, I am going to Alaska this June to fish for Kings. They recomend 25 lb test line and a 8 or 9' rod. Do you have any recomendations for a rod (to build) and reel set-up. I would like to build a spiral or revolver rod but have never built one.
Any suggestions as to blanks, guides, spacing, and reels would be appreciated.
Thanks
Forum: rodboard |