SPONSORS
2024 ICRBE EXPO |
Results 31 - 60 of 110
12 years ago
Skipp Hughes
Mike I had already looked in their catalog and Website and didn't see it ... I just looked again and still can't see it ..... Am I Blind or just old?
Do you have any part numbers?
Thanks
Forum: rodboard 12 years ago
Skipp Hughes
I already did that.... My customer and I have both been trying to contact him for over a month..... Aggravating to say the least
Forum: rodboard 12 years ago
Skipp Hughes
I'm beginning to think that... What makes me think they are still out there is this guy is still having them Imported and selling them online.. I find it hard to believe they can be proprietary .
I could go up to an 8 MM Ring if I had to
Forum: rodboard 12 years ago
Skipp Hughes
I got a Musky Rod in for a Tip Replacement and I am striking out on finding the right one. I'm hoping somebody can help me out
The rod is a Tooth Tamer 8 Ft Heavy 80 to 120 Lb line
The tip measures 13/64 and the ring is a 6 MM Black in color
Can you help a fella out?
Thanks
Skip
Forum: rodboard 12 years ago
Skipp Hughes
Wax the steel rod and you should be Ok to do it all at once
Forum: rodboard 12 years ago
Skipp Hughes
JIM MOWL Wrote:
-------------------------------------------------------
> Skip it looks good to me. I wouldn't make it a
> down locking either. One observation, the foregrip
> and the butt grip is sloped smoothly towards the
> blank and the rear of the upper section of the
> rear grip has a pretty abrupt shoulder facing the
> lower grip. Just in my opion, that upper rear
Forum: rodboard 12 years ago
Skipp Hughes
Thanks Fellas I think I'll turn the seat around ..... See I said I never built a spinning rod LOL
Its hard to tell if the user likes it Its going to b e under my Tree for the Grandson...
I'll throw a pic up after I get it done
Thanks again
Forum: rodboard 12 years ago
Skipp Hughes
I have never built a Spinning rod but I needed this for my Grandson for Christmas... What is your opinion on the shape and length ?
Its 14 1/2" inches long and if it matters its a 6 Foot 1 PC Blank
Thanks
Skip
Forum: rodboard 12 years ago
Skipp Hughes
I had Lynn make a custom length for me last year It works great
Forum: rodboard 12 years ago
Skipp Hughes
From what I know Snagging is 100% Banned in New York Not sure though
Forum: rodboard 12 years ago
Skipp Hughes
That's what I saw too Billy..... I just didn't feel like typing it.... LOL
Forum: rodboard 12 years ago
Skipp Hughes
46. Re: Rose help
Mine closed up fine.... I followed Billy's instructions.... If you're still having trouble I'd rip it off
Forum: rodboard 12 years ago
Skipp Hughes
47. Re: Rose help
I hope mine turns out OK I just started on it about 30 minutes ago.... Billy is great about answering questions ...
Forum: rodboard 12 years ago
Skipp Hughes
I agree with backlash tools..... I needed one custom made and it was shipped to me in no time at all... Works great
Forum: rodboard 12 years ago
Skipp Hughes
I got it from the CCS Data sheet I downloaded from the internet..... The builder that posted the Specs was Brian Whalen....
Forum: rodboard 12 years ago
Skipp Hughes
From the CCS data sheet I have the ERN is 8.28 and the AA is 64
Forum: rodboard 12 years ago
Skipp Hughes
Can any body help a fella out here
I'm looking for a 9 WT 4 PC Blank The length needs to be 9'6" or 10'
I'd like to keep it under $200
Thanks
Forum: rodboard 12 years ago
Skipp Hughes
Dave
I live in Erie and I build a ton of rods on the RX 7 9' and 10' 7 WT Blanks.. I have a few guides using them and that seems to be all they ask for...
As far as the Blank Nagy recommended I have built 3 of them and while they are a good rod for Erie keep in mind not all fisherman will like them They are really whippy..... I even had one customer ask me to sell his after using it
Forum: rodboard 13 years ago
Skipp Hughes
Now I know why my order I placed on Tuesday is still sitting in the warehouse instead of on my bench where it should be
Forum: rodboard 13 years ago
Skipp Hughes
Thanks John I forgot all about mar Krutz I'll shoo t them an email.... And I'm looking forward to the show My first one
Forum: rodboard 13 years ago
Skipp Hughes
Lane I want Longer Strips I do make Thin Rings on the lathe
If all else fails I'll buy some of the Blocks Mudhole has and Use the Bandsaw....
Forum: rodboard 13 years ago
Skipp Hughes
Do any of you know of a suppliers that has any of the Burnt 1/8" Strips left in stock
Forum: rodboard 13 years ago
Skipp Hughes
I have done a few Cross Wraps Only Chevrons 2 color Fades....
I have a client I am building a 4 WT fly rod for and he only had 2 requests.....
First is a Carbon Fiber Grip That is handled
Second is a Chevron Fade similar to the one on the cover of Rodmaker Volume 3 Number 2.... using 3 or 4 colors..... 2 of which must be Black and Silver Metallic
Throw out some Ideas fellas
Tha
Forum: rodboard 13 years ago
Skipp Hughes
Bob I just did a Batson 5 WT switch With Minimas if you want to check it out I Live in Erie
Forum: rodboard |