SPONSORS
2024 ICRBE EXPO |
Results 181 - 210 of 852
16 years ago
mark blabaum
I made a couple of reel seat inserts in Joe Emig's style, but with Billy V's technique. The brick reel seat is made of walnut with maple veneer. It's made with 60 degree wedges. The grip is made with walnut and maple with brass trim, mounted on a 3S60MLF St Croix blank. I should add it has a super glue finish as well.
Forum: rodboard 16 years ago
mark blabaum
182. Couple more webs
I made a couple of web (Samsara style) grips for a friend (two on the right). He provided a couple of Mudhole reel seats that are in their holographic paint. They look very nice; the wood on the two on the right is Walnut, Maple veneer and a crushed turquoise for the center dot. The fly rod grip is going to be for my son, he wants to build a 4wt so he can learn to fly fish. Byron (recipient of th
Forum: rodboard 16 years ago
mark blabaum
If you're looking for a light weight reel seat and fore grip this may be the answer. Billy sent me an idea on a light weight reel seat. It's a inside out turning and is hollow in the center. This is a prototype and is unfinished. It needs some work but I kind of like the look of it. Thanks for the idea Billy V.
Forum: rodboard 16 years ago
mark blabaum
I just wanted to post a photo of a grip made of Bocote, and Maple. The two axis chevron is done with a herringbone design. The inspiration for this came from Samsara Cues and from several wood turners that I know.
Forum: rodboard 16 years ago
mark blabaum
185. Putters LSJ782's
I got a couple of Lamiglas LSJ782 blanks from Putter. They are the first that I have used and I'm very pleased with the Lamiglas blanks. The LSJ782 on the top is a spider web inspired by one of the pool cues of Samsara Cues. The bottom rod is using one of the graphie handle kits from Bob Mc at Custom Tackle. The lower rod combined with Bob's handle and Lami blank is one of the lightest rods I hav
Forum: rodboard 16 years ago
mark blabaum
186. Chevrons
I have been messing with a couple of pens and thought I'd post one. It kind of looks like a chevron. Made of Wenge and Bloodwood.
Forum: rodboard 16 years ago
mark blabaum
187. Eccentric Cams
Just an idea for changing the angle of reel seat, using eccentric cams.
Forum: rodboard 16 years ago
mark blabaum
188. Group Shot
I put together a few handles and made a trade for some blanks. The top is made of walnut, cherry, and maple. The insert is ipe with maple wedding bands. Second from the top is walnut with bloodwood trim. Third from top is Wayne's Ipe with maple eliptical and trim. Forth from the top is Bloodwood with Copano cork. The bottom is maple with a bloodwood elliptical and checkers. The insert is what was
Forum: rodboard 16 years ago
mark blabaum
189. Waynes D's Ipe
I received this Ipe from Wayne D. and finally got a chance to work with it. It turns well and has a great look when finished. The ellipical is Maple, trimmed in dyed black veneer and the fore grip is trimmed with padauk and maple.
Forum: rodboard 16 years ago
mark blabaum
I just thought I'd try to use some old Aluminum that I had laying around. It turns like butter and makes a nice accent ring. The top grip is maple, with bloodwood checkers. The lower grip is bloodwood with maple checkers. The finish on the handles is super glue. The lower rod is one I built on a St Croix flipping stick to try out the durability of CA for a grip finish. I applied the CA on the cor
Forum: rodboard 16 years ago
mark blabaum
I thought I would try a Tiger Wrap for the labels on a rod. I think that it's a very nice accent for the rod. Thanks Mr Throop and Colby.
Forum: rodboard 16 years ago
mark blabaum
192. Billy's Spider
My first spider and closed wrap. The spider needs some work but it should come in time. Thanks for the help Billy.
Forum: rodboard 16 years ago
mark blabaum
193. One Last Spider Web
I have one last rod to post with a web design. The fore and aft grips look like cob webs as well. I did Billy V's Black Widow between the split. The blank is a Shikari PP703.5 and the wood is walnut with maple veneer. The fore and aft grips are six segments x seven segments. I almost forgot the web is a take on the Samsara Cues Web pattern.
Forum: rodboard 16 years ago
mark blabaum
This is one I finished a while ago. It's a Fuji NPS seat trimmed with maple and corian. The diamond is a big leaf maple burl.
Forum: rodboard 16 years ago
mark blabaum
195. Tiger Wrap Hookeeper
I thought I'd try the tiger wrap and it turned out well. The picture is a little grainy but I used the top thread to hold the hook keeper and ran a continuous thread under the keeper as well.
Forum: rodboard 16 years ago
mark blabaum
196. Two for Jim and Dave
I have a couple of rods going to Samsara Cues to thank them for the use of the spider web pattern. The one on the left is White Oak and Blood Wood. The one on the right is Walnut and Maple. If you want to see the original designs they are on www.samsaracues.com once again Jim and Dave Thanks for the ideas. I almost forgot to thank Billy V as well.
Forum: rodboard 16 years ago
mark blabaum
197. Two for Jim and Dave
I have a couple of rods going to Samsara Cues to thank them for the use of the spider web pattern. The one on the top is White Oak and Blood Wood. The one on the bottom is Walnut and Maple. If you want to see the original designs they are on www.samsaracues.com once again Jim and Dave Thanks for the ideas. This is just another veiw. I almost forgot to thank Billy V as well.
Forum: rodboard 16 years ago
mark blabaum
198. NPS reel seat
After seeing the NPS seats on this photo site I just had to try one. The blank is a 4S70MF that I picked up from Binghams Enterprizes in the close out section. The grip is a Fuji NPS with Walnut trimmed with checkers and corian. I finished this for myself and only hope that I don't sell this one out from under myself. I've been a working on a couple of rods for the guys at Samsara and hope to pos
Forum: rodboard 16 years ago
mark blabaum
I finally got around to building a few rods for myself and just in time to go to Iowa for the Rod building get together this week end. Right to Left: 1) 8' Crappie Rod built on a ATC 8'-6wt fly blank, made of Kauri and trimmed with corian and a checker. 2) 6'6" Batson Blank, grip is made of Wenge, Padauk and trimmed with corian. 3) St Croix ES66MF trimmed with checkers and corian. 4) St
Forum: rodboard 17 years ago
mark blabaum
Just one I was messing around with, it still needs some refinement. Still fun to play with.
Forum: rodboard 17 years ago
mark blabaum
202. Billy's Challenge
Grip for a Musky rod made of Curly Maple and Big Leaf Maple Burl with several layers of veneer. The dimensions got away on me and I had to make a musky grip (live and learn) in order to make the cube fit the handle. The basic idea came from a pool cue they do make a great looking grip.
Forum: rodboard 17 years ago
mark blabaum
The web is made of maple and dyed black veneer trimmed in corian. The fore and aft grips are walnut, cherry and maple. I'm looking for opinions on weather or not to keep the orange trim. I'm undecided and need an objective opinion so please let me know if you think the orange should stay or go. Thanks Mark.
Forum: rodboard 17 years ago
mark blabaum
This is an elliptical reel seat made of Padauk and the split handles are made of Wenge. The Wenge is trimmed with Padauk, Maple veneer, Dyed Black Veneer, and Corian. I'm out of blanks so this is posted with out being mounted, so if any blank manufacturers would like to donate please feel free to do so (LOL). BTW there are no checkers on the handle any where that's what makes this one different.
Forum: rodboard 17 years ago
mark blabaum
The rod is a St. Croix Elite with a Big Leaf (oversized) Maple Burl reel seat. The cork is Andys Copano trimmed with Wenge and Maple.
Forum: rodboard 17 years ago
mark blabaum
207. Padauk reel seat
This is a rod that I'm working on for a friend. It's a St Croix Elite with burl cork (Jann's) and Padauk for the reel seat trimmed with Padauk, Wenge, and Maple.
Forum: rodboard 17 years ago
mark blabaum
208. Checker Reel Seat
I cut out the center section of a 18mm casting seat and replaced it with a segmented checker seat. The seat is made of Walnut, Paudauk, and Maple.
Forum: rodboard 17 years ago
mark blabaum
209. Pair of Checkers
The top handle is a Juniper (Thanks Stan) grip with a Padauk and Maple checker. The lower is a split grip with Maple and Walnut checker trimmed in Burl Maple and Curly Maple.
Forum: rodboard 17 years ago
mark blabaum
A pair of Shikari PP703.5 rods. The top rod is Juniper that Stan Grace was good enough to trade to me. The Juniper is light and smells great when turned. The lower rod is Copano Burl with Maple and Walnut checkers trimmed with Burl Maple and Curly Maple.
Forum: rodboard |