SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 23 of 23
11 years ago
chip chappell
1. 10 surf rod
i have a guy who wants me to replace his guides on his surf rod. there is only 4 guides on the rod. I was going to use the 27 theory but then again i would have to refinish the whole thing . Do you think i can put smaller guides and not change the spacing .Just want to just upgrade the rod for the gent
Forum: rodboard 11 years ago
chip chappell
I have built 3 batson jigging rods RCKJB600 -112 and RCKJB600-150. great rods. the guys love them
Forum: rodboard 12 years ago
chip chappell
3. cork seal
just finished split grip. I used burnt and natural burl blocks. Question should i use a cork seal on the grip?
thanks
Forum: rodboard 12 years ago
chip chappell
4. cork tape
i have some cork tape with no sticky backing. I brought some 3m77 glue.on the instructions it says to spray surface.my question is do i spray both surfaces or one. thanks for the help
chip
Forum: rodboard 12 years ago
chip chappell
Russell
Yes i think will be happy with anything i can to upgrade the rod. the rod is used for fishing with eels for bass good size fish. what is the 27 method?? i like the single foot guides myself
thanks for the come back
chip
Forum: rodboard 12 years ago
chip chappell
Spencer
He has got a Penn 704 and will be using #20lb test mono
thanks for the input
chip
Forum: rodboard 12 years ago
chip chappell
A friend of mine gave me an old lami 7'-6'" spinning rod # mb063 ?? to replace the guides.not sure about the blank#. 7/8" butt and a#12 tip. All Perfection guides 4 to exact .Biggest being a 60. What size fuji guides would be a better upgrade
thanks
chip
Forum: rodboard 13 years ago
chip chappell
question is is still good to use a color preserver when using metallic thread?? or is it over kill
thanks
chip chappell
Forum: rodboard 13 years ago
chip chappell
ok got my blanks from mud hole 6'.0" 40 60 lbs class question never did a foam grip before only cork.the rear grip is taper .this has a gimbal and a butt cap also which way does the taper go taper towards the butt to meet the gimbal or the opp.feel stupid or just not knowing
Forum: rodboard 13 years ago
chip chappell
Question why is it i only see vert jig rods with eva foam grips?? is it b/c of the stress and the bend of the blank.There must be a reason.Thought i would ask you guys
thanks
chip chappell
Forum: rodboard 13 years ago
chip chappell
12. help with logo
Hi guys
Have a person who wants a team logo put on their rod.i have shrunk the logo down and and put it on photo paper (gloss) type. The problem is its kind of thick.
And with the small circumference of the rod. its going to take more finish then i really want to build up to be come level .
i used super glue to hold the material to the rod
I see allot of logos online. But not the one I'm
Forum: rodboard 13 years ago
chip chappell
Question Guys
Somebody gave me a 7 pc Aetna guide set.made out of Monel. How would these hold up. using braid power pro ??
Thanks
chip chappell
Forum: rodboard 13 years ago
chip chappell
15. x grip
Hi
I want to try some x grip over some old cork. Can you do the fore grip also?? How does it end up on the taper end of the fore grip.I have a couple of old rods i want to try it on. Is there a place to get instructions .
thanks
chip
Forum: rodboard 14 years ago
chip chappell
Thanks guys for the help on finish for the rod.For got to ask which is the best way to take the old finish off?? Sanding or some other means if there is any thanks again
chip chappell
Forum: rodboard 14 years ago
chip chappell
Hi all
A friend of mine ask me to refinish his rod. The rod is bamboo south Bend boat rod.Should i use prema gloss on the rod and wooden butt.
Or should i use a spar urethane
Sincerely
chip
Forum: rodboard 14 years ago
chip chappell
thanks i did what you said.90% better
thanks again for everyones help
chip
Forum: rodboard 14 years ago
chip chappell
hi guys
i Just built a spinning rod for someone for xmas. My question is this i used 2 coats of flex coat lite.The finish was great. Really good but ,in a small feather inlay there is a small fish eye or bubble the the size of a pin head right in the middle of the inlay.!!! help Please.I don't want to try to refinish the butt wrap where i pictured frame the inlay.Santa is coming. thank you.eve
Forum: rodboard 14 years ago
chip chappell
Thanks Roger and other Rod builders
Thanks allot for all the reply's to my post on this subject.
Chip
Forum: rodboard 14 years ago
chip chappell
can i use a green scotch pad ?Or 600 grit sand paper. What do you think? i'm going to use permagloss for the finish
thanks for the help
chip
Forum: rodboard 14 years ago
chip chappell
23. sanding a blank
What is the best way to sand a carbon or fiberglass blank?
thanks
chip
Forum: rodboard
Current Page: 1 of 1
|