SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 33
14 years ago
Bobby Silger
I did this for a customers wife. He also had me custom paint the spinning reel for her.
Forum: rodboard 15 years ago
Bobby Silger
I took one of my old rods and converted it to a split grip.
Forum: rodboard 13 years ago
Bobby Silger
With the name you assume there products are made in the U.S. I was wondering if anyone on here knew if this was true or if they manufacture their products in China or somewhere else?
Forum: rodboard 13 years ago
Bobby Silger
I knew you all would know what to do. Thanks for the help I believe I am going with the water transfer.
Bobby
Forum: rodboard 13 years ago
Bobby Silger
I had a Marine call me today and wants me to try and build him 15 rods with the marine desert digital camo pattern on the blank. He travels the country helping out the injured Marines and has a boat wrapped with this camo and wants the rods to match. Does anyone know how I would go about getting this camo pattern put on some blanks?
Thanks
Bobby
Forum: rodboard 13 years ago
Bobby Silger
I have a customer that wants an 8' composite crankbait blank. Any suggestions on were to find one?
Thanks
Bobby
Forum: rodboard 13 years ago
Bobby Silger
I have a customer that brought me a rod that has a custom made down locking reel seat on it that is broken. It is like th Struble D-2 deluxe down locking seat but there is no insert the original builder used the cork handle and just turned it down. This seat is missing the end cap that the reel foot sits in. The end of the cork handle that it was glued to is 16mm. Were can I find the parts to
Forum: rodboard 14 years ago
Bobby Silger
I am looking for a fiberglass crankbait blank similar to the Dobyns 765CB. This blanks diamiter is still small and it looks more like a graphite. Does anyone know what blank this is or one that is like it?
Thanks
Bobby
Forum: rodboard 14 years ago
Bobby Silger
Nice rack. I have the same ones with the Okuma label on them.
Forum: rodboard 14 years ago
Bobby Silger
Looks good. Can't wait to see what kind of program you will have.
Forum: rodboard 14 years ago
Bobby Silger
Ya I look at the photo page but not much on fighting butts on the split grips.
Forum: rodboard 14 years ago
Bobby Silger
I have a guy that has a lot of G. Loomis rods that he does not like the look of cork. He is wanting me to replace all of them with EVA split grips. He did not like the look of the two piece rear grip that I showed him on one of my rods so I put a one piece fighting butt on and he is picking that up tonight. He said today on the phone that he was looking at one somewere that had a rubber but ca
Forum: rodboard 14 years ago
Bobby Silger
Thanks for all the help. I told him he had two options. First was to leave it with me and not take it to the tournament and I would fix it right. The second option was for me to use the 5 min devcon and it would yellow over time and could get brittle. That way I had no responsiblitly for how it would react or look after time. He went with the quick fix.
Forum: rodboard 14 years ago
Bobby Silger
Well he wants to wait while I do it and than take it with him. There is one guy around here that does that. I am not sure what epoxy he uses.
Forum: rodboard 14 years ago
Bobby Silger
I usually use flex coat high build but I just got a phone call from a guy that needs an eye replaced tonight. He has a tournament he is leaving for in the morning. Is there a two part epoxy that I can use that will work on the eye were it will not have any issues?
Forum: rodboard 14 years ago
Bobby Silger
19. Cutting EVA
I need to cut some length off of some EVA grips. I have not installed them yet. I think I have heard about using heavy lb mono to do this but not sure. How do you guys cut your EVA?
Thanks
Bobby
Forum: rodboard 15 years ago
Bobby Silger
20. Blank help
I have a customer that is a guide for sandbass and striper. He wants me to make him a 7'6" casting rod for sandbass, striper and some cat fishing. His lure weights are 1 1/2 - 2oz. I was looking at the RX7 IFS904 but wanted your opionon on what blank you think would be the best for his application?
Thanks
Bobby
Forum: rodboard 15 years ago
Bobby Silger
I was thinking of trying these out. After doing a search on them the last thing said about them a couple of months ago was that the reels would jump or pull out of the rear of the reel seat. I was wondering after a couple of months if anyone that has been using them has had problems with them? I was wanting to use them on a flipping stick and a carolina rig set ups for more blank exposure to f
Forum: rodboard 15 years ago
Bobby Silger
Well after making four rods and drinking the kool aid I am hooked. I decided it would be a good investment to get a subscription to Rodmaker Magazine. I can not wait for it to get here and use it as a tool to learn new things.
Bobby
Forum: rodboard 15 years ago
Bobby Silger
He is fishing from the bank and is making long casts with light weight jigs an a slip cork on it. He wanted a two piece rod so that he could fit it in his truck and needs it to be 7' so he can make the long casts.
Forum: rodboard 15 years ago
Bobby Silger
I am looking for a two piece 7' blank for a crappie rod for a friend. Looking in the price range of less than $30.00. Does anyone know of one?
Thanks
Bobby
Forum: rodboard 15 years ago
Bobby Silger
What Batson blank would you recommend for throwing Sinko's and Fluke's?
Thanks,
Bobby
Forum: rodboard 15 years ago
Bobby Silger
I did a search and could not find anything on this. I have a guy that wants me to marble his whole rod. If I do this will it affect the action of the rod? Also about how much weight do you think it will add? Some of you may have done this. Pros, Cons? Any feed back would be great.
Thanks
Bobby
Forum: rodboard 15 years ago
Bobby Silger
I am wanting to purchase some Batson Rainshadow blanks. Were is the best place to purchase them online?
Forum: rodboard 15 years ago
Bobby Silger
Thats great. I have a whole lot of the Createx airbrush paint. I will have to give them a try. Thanks for the post.
Forum: rodboard 15 years ago
Bobby Silger
Has anyone used these for the marbling? I found them at Hobby Lobby. They are close to my house and are at a good price since I don't have to pay shipping. If you have use them how did they do? Here is a link to them.
Forum: rodboard 15 years ago
Bobby Silger
Well I have had many ideas and am pondering some of them. I already have a small custom lure business that I do " Dynamite Custom Lures". I was think of this name for them; Dynamite Stix?
Forum: rodboard |