SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 13 of 13
10 years ago
John Davidson
1. Re: Printer?
Just a question. I am about to start printing my own labels and I want to use the clear labels on a matt black blank, what printer would the experts recommend I buy and can you select the color that will show up on the label against the matt black blank, ay white.
I would sure appreciate some help on this one.
Thanks
Forum: rodboard 10 years ago
John Davidson
I have used these single foot guides for tips on many rods. I grind the guide foot to ensure a smooth transition from the guides foot to the blank. Use a very thin strip of masking tape to hold the guide in place at the bottom of the foot and then wrap down form the guide ring to the blank, I have to have the guide facing to the right side as I am right handed. When you get close to the masking t
Forum: rodboard 11 years ago
John Davidson
I use Central Vac piping, thin wall, light weight and very strong and it makes for a nice rod tube after
Forum: rodboard 11 years ago
John Davidson
Thanks for the replies got them now, they are part of a handle kits
Forum: rodboard 11 years ago
John Davidson
I buy some of the central vac piping from Home Depot and give them that as a rod tube with the end caps, not much cost to me but great for shipping them and the customer gets that little extra
Forum: rodboard 11 years ago
John Davidson
Been out of the rod building circuit for a few years. Are Wiebe reel seats still manufactured or are they out of business, love the spinning seats.
Thanks
Forum: rodboard 15 years ago
John Davidson
Hope soemone can help me with this, dont know if I am right with what I found out so far
The Dynamwood reel seats are actually made from "resin" and then finished to look like wood.
If this is true then can I buy this resin in blocks or certain size pieces. The second question is how do you finish the resin to look like wood and where can I buy the material.
Thanks for any help
Forum: rodboard 15 years ago
John Davidson
Thanks for th help, Muhole had the Stinger seats and they are ordered. Didnt just buy the inserts got the whole thing in Ccork and Rosewood
Thanks, great forum for information
John
Forum: rodboard 15 years ago
John Davidson
10. Wiebe reel seats
I am looking for the cork insert for the Wiebe spin seat, the one loomis uses on their rods
Any help will be appreciated
Thanks
John
Forum: rodboard 15 years ago
John Davidson
Jeff,
Thansk for the information. I use Flexcoat high build for the heavier rods and light build for the fly rods, does this help.
Thanks
John
Forum: rodboard 15 years ago
John Davidson
13. rod dryer speed
I am just making a dryer , had one and sold it a few years ago due to relocation for work. I just found a good motor at a BBQ store cost is a little high at $140.00 but it is rated for continueous and can turn 100 lbs. I wanted one like this because I build a lot of rods and when the dryer is complete, with 2 drums at 18" diameter I can dry a few rods at once, the motor is extremely quiet.
Forum: rodboard
Current Page: 1 of 1
|