SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 106
15 years ago
Jeffrey Van Zandt
7-foot 2-tip cane rod with engraved Bellinger nickel silver reel seat
Forum: rodboard 15 years ago
Jeffrey Van Zandt
anickel silver engraved buckeye burl fly rod reel seat reel seat
Forum: rodboard 15 years ago
Jeffrey Van Zandt
two brass end caps engraved with caddis and stone fly nymph along with spec around the side
Forum: rodboard 15 years ago
Jeffrey Van Zandt
a brass rod tube end cap engraved for a costom shop @-inch dim
Forum: rodboard 15 years ago
Jeffrey Van Zandt
the finished ivory end cap with the colored mayfly ready to glue up on the reel seat
Forum: rodboard 15 years ago
Jeffrey Van Zandt
This vice will hold round and squear stock well for centering for drilling
Forum: rodboard 15 years ago
Jeffrey Van Zandt
color being added to an ivory scrimshawe work of a mayfly
Forum: rodboard 15 years ago
Jeffrey Van Zandt
fly rod reel seat that is finished trunning in the lath
Forum: rodboard 15 years ago
Jeffrey Van Zandt
fly rod reel seat stock on mandrill in lathe ready to start trunning
Forum: rodboard 15 years ago
Jeffrey Van Zandt
A PSI lathe mandrill with 3- different size bushing from front to back 7-mm bushings on the mandrill is 8-mm bushings in the rear is the 10-mm bushing with this mandrill and bushing set up I can trun all 3 bore sizes I need to
Forum: rodboard 15 years ago
Jeffrey Van Zandt
a Ambonya wood reel seat blank ready to drill set up in the vise
Forum: rodboard 15 years ago
Jeffrey Van Zandt
13. reel seat drills
3-drills for the drilling of fly rod reel seats left to right a 7-mm brad point, next a 8-mm used for most reel seat bores then a 10-mm larest I use but all holes are done first with the 7-mm
Forum: rodboard 15 years ago
Jeffrey Van Zandt
a lee valley vice that is made to hold square or round stock blanks for drill press drilling
Forum: rodboard 15 years ago
Jeffrey Van Zandt
15. reel seat ring
nickel silver fly rod reel seat ring on expanding arbor, ready to have the rope knurling added be for engraveing
Forum: rodboard 15 years ago
Jeffrey Van Zandt
one seat a engraved nickel silver on amboyna and the other is a scrimshawed nude in color on ivory end cape which is going on a new cane rod being built on a old orvis taper a slow @#$%& nymphing rod,8-foot 2-pc 2-tip
Forum: rodboard 15 years ago
Jeffrey Van Zandt
a engraved Billenger down locking reel seat hand engrave with a mayfly dun
Forum: rodboard 15 years ago
Jeffrey Van Zandt
20. ivory end cap
scrimshaw art in color on fly rod end cap
Forum: rodboard 15 years ago
Jeffrey Van Zandt
24. ree; seat finish
final finsh waxing the reel seat after sanding down to 2500 and permalyn sealer
Forum: rodboard 15 years ago
Jeffrey Van Zandt
25. reel seat finish
a new reel seat sanded down to 2500 and ready to be pad finished down to 25000 grit
Forum: rodboard 15 years ago
Jeffrey Van Zandt
mt engraved nickel silver ferrule mt and pinned on butt with wrap of pearsalls gossamer chestnut silk with 1 coat of Alchemist amber varnish on the wraps the Alchemist varnish is a artest medum used for mixing paint pigments for oil paintings but is soaks, but is hard to dry so after 2 days the first coat of Southerland wells will go on that drys all the 2 more sand with 1500grit and final coa
Forum: rodboard 15 years ago
Jeffrey Van Zandt
1/4 inch router set in a Lowes 10.00 sales router tabel with 5/8 inch fingernil modafide router bit cutting a reel seat station
Forum: rodboard 15 years ago
Jeffrey Van Zandt
the lathe I use the most for turnning reel seats with a pen turnning mandril in place with reel seat on it
Forum: rodboard 15 years ago
Jeffrey Van Zandt
hand engraved ferrules headed for a new home on a new 7-foot Bamboo rod
Forum: rodboard |