SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 39
12 years ago
Rick Keith
Im trying to find a blank that will be close to the tide master 3 pc travel rod,its a 7.6 hf 3pc rod ,i need something close to it in a 2pc 7.6 blank,anyone have a idea?
Forum: rodboard 14 years ago
Rick Keith
ive had one for a couple years its does a good job,just limited to colors
Forum: rodboard 14 years ago
Rick Keith
Andy Snedden Wrote:
-------------------------------------------------------
> Actually Rainshadow does have a 15' Spey blank.
> This is the RXF 15010/11-3. The blank is a 10/11
> wt 3 piece and is a rocket launcher. We have
> several in stock in the matte clear finish.
>
> Andy Snedden
> Custom Rodbuilders Inc
> (Rodbuilder Supplies link)
> toll-free 1-877-30
Forum: rodboard 14 years ago
Rick Keith
Andy Snedden Wrote:
-------------------------------------------------------
> Actually Rainshadow does have a 15' Spey blank.
> This is the RXF 15010/11-3. The blank is a 10/11
> wt 3 piece and is a rocket launcher. We have
> several in stock in the matte clear finish.
>
> Andy Snedden
> Custom Rodbuilders Inc
> (Rodbuilder Supplies link)
> toll-free 1-877-30
Forum: rodboard 14 years ago
Rick Keith
Andy Snedden Wrote:
-------------------------------------------------------
> Actually Rainshadow does have a 15' Spey blank.
> This is the RXF 15010/11-3. The blank is a 10/11
> wt 3 piece and is a rocket launcher. We have
> several in stock in the matte clear finish.
>
> Andy Snedden
> Custom Rodbuilders Inc
> (Rodbuilder Supplies link)
> toll-free 1-877-30
Forum: rodboard 14 years ago
Rick Keith
When your doing a rod,say like a blue and white is there a trick to keep the color from blending togather,i put the blue base down then add the white in small places around the rod,it seems like the wjite will blend in with the blue,almost all of it,what the trick to this not happening?
Forum: rodboard 14 years ago
Rick Keith
7. alps printer
HELLO IM TRYING TO FIND SOMEONE THAT MAY USE ONE FOR PRINTING LABLES TO SEE WHAT KIND OF LABLES THEY WILL REALLY PRINT,PLEASE LET ME KNOW IF ANYONE MAY USE ONE,THANKS RICK
Forum: rodboard 15 years ago
Rick Keith
what is the lightest set of casting guides?any one no besides recoil guides,
Forum: rodboard 15 years ago
Rick Keith
10. lamiglas blank?
Anyone no what the spec on this blank are?SMK903M. 8ft rod blank,thanks
Forum: rodboard 15 years ago
Rick Keith
11. 13 ft rod blank
Doed anyone no who would have a 12 ft or 13 ft 2pc rod blank like a steelhead rod?it needs to be a round a 8 to 15 lb line wt rod or close to that size,thanks
Forum: rodboard 15 years ago
Rick Keith
12. rod marble color
can some one tell me if i want to do a rod in green and gray,what color would you do the guide wraps in and what color would you use to get the green and gray marble look,thanks
Forum: rodboard 15 years ago
Rick Keith
Mike Barkley Wrote:
-------------------------------------------------------
> Check out the library above for an article on
> marbleing! Aew you in Mich? Where at?IM IN QUINCY,OVER BY COLDWATER
Forum: rodboard 15 years ago
Rick Keith
14. marble on a rod
how make a good kit to start doing this?and maybe a video so i no more about this?thanks very much
Forum: rodboard 15 years ago
Rick Keith
Billy Vivona Wrote:
-------------------------------------------------------
> What is a p-touch decal?
its a printer that brother make
Forum: rodboard 15 years ago
Rick Keith
16. coating decals
WHEN COATING A DECAL OR NAME ,WHAT WOULD MAKE THE DECAL LOOK LIKE ITS TRYING TO FLOAT UP TO THE TOP OF THE FINISH?OR IT SEEMS LIKE THE CORNERS WANT TO COME UP.THANKS
Forum: rodboard 16 years ago
Rick Keith
17. guide foot
ON A SVLG FUGI GUIDE WITCH PART OF THE GUIDE GOES FORWARD,THE SMALL PART OF THE FOOT OR BIG END ?OR DOES IT MATTER?
Forum: rodboard 16 years ago
Rick Keith
Bob Balcombe Wrote:
-------------------------------------------------------
> I like Spencers idea. In the past I have built up
> the flat side of the grip with layers of foam.
> Excellat hint Spencer
> Good Wraps Bob
Thanks i will have to check that out,thanks again
Forum: rodboard 16 years ago
Rick Keith
THIS MIGHT BE STUPID,BUT HOW CAN YOU TURN A PISTAL GRIP HANDLE ON A ROD IN YOUR WRAPPER OR DRYER,IT DOESNT TURN STRAIGHT,IT OVAL OR EGG SHAPED,WHAT CAN YOU DO SO YOUR NOT HAND TURNING THIS?THANKS
Forum: rodboard 17 years ago
Rick Keith
21. measuring tool
Does any one no where to get the tool that you put the blank in to measure out or lay out the marks for chevron wraps or what ever ,cant thing what its called just a ruler with a 90 degree or corner ,
Forum: rodboard 17 years ago
Rick Keith
THATS WHAT IM LOOKING FOR A HOT FOIL PEN WHAT TRANSFERS THE FOIL TO THE BLANK,
Forum: rodboard 17 years ago
Rick Keith
im looking for the people that sell the foil that you use a hot gun to put this on a blank,comes in gold or silver,dont no who this is or where to get this,thanks alot
Forum: rodboard 17 years ago
Rick Keith
Want to find some benchmark blanks 7ft 8/15 line wt does anyone have some of these to sell?or something close to this,Thanks
Forum: rodboard 17 years ago
Rick Keith
25. Blank brand
Has anyone heard or no who makes a blank by the name of bench mar or benchmart blank?
Forum: rodboard 18 years ago
Rick Keith
26. colar preserve
WHAT IS THE BEST COLAR PRESERVE OR IS MOST OF IT ABOUT THE SAME?
Forum: rodboard 18 years ago
Rick Keith
27. dryer motors
where can you buy these motors that come on theys rod dryers?
Forum: rodboard 18 years ago
Rick Keith
Does anyone no if stcroix came out with this yet on the ice rods and where you can get them?
Forum: rodboard 18 years ago
Rick Keith
who on the left side of the screen would have a good price on a flipping stick blank?
Forum: rodboard 18 years ago
Rick Keith
30. fly rod blank
Where can i get a 5 or 6 peice blank?Need to make a travel rod.
Forum: rodboard |