SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 79
14 years ago
Ed Carr
2. camera_1_749
Finished transformation of 7' to 8'6" Matrix 12-25 lb blank.very cloudy for pic. Blue thread on green blank no trim. Its a plain Jane build. No frills.
Forum: rodboard 17 years ago
Ed Carr
I did this one a couple years ago ,had on old photo site. Didn't realize I hadn't posted on new sight. My personal best.
Forum: rodboard 17 years ago
Ed Carr
Cut a red foam and dark blue foam into spirals and glued together used just hoods for reel seat and cut groove in to except reel foot. Is very light and comfortable. Total handle is 12" long because,I extended 6' ultra light by 12".
Forum: rodboard 17 years ago
Ed Carr
Built three heavy duty Matrix spin rods of different weights, to find the one most suited for my needs. Center rod is marbleized and is very nice looking,gold and green swirls. Power drive on lens of camera is stuck so could not capture rods. New camera is on way so maybe next pics will be better.
Forum: rodboard 14 years ago
Ed Carr
9. camera_1_751
Handle on an 18" extension on Matrix blank. Used a fluorescent green mixed with white as a base for marbleizing
Forum: rodboard 14 years ago
Ed Carr
10. Picture_186
Parts used in making a 8'6" rod out of a 7' Matrix blank used a piece from an old fiberglass deep sea rod,for extension.
Forum: rodboard 17 years ago
Ed Carr
11. 3D box wrap
This is easy and fun to wrap,it starts to mess with your eyes as you get to end. I need to do some epox work before it is finnished. ED
Forum: rodboard 17 years ago
Ed Carr
Wrapped a single under wrap color pre.and light coat epoxy. Then triple over wraps first two wraps no color pre. and lihgt coat of epoxy on each. Last over wrap color pre. and coated all with epox. Not bad for first roller rod.
Forum: rodboard 17 years ago
Ed Carr
15. Calstar Standup
Made a 6'Baja Boomer aftco big foot rollers.
Forum: rodboard 19 years ago
Ed Carr
Wanted a striper fly rod to stash on boat..Two silver trim bands in front of butt cap don't show up in pic.
Forum: rodboard 19 years ago
Ed Carr
The grip for metallic thunder bird and first fly rod in finishing stages of build.
Forum: rodboard 19 years ago
Ed Carr
Finished grip for metallic thunder bird and first fly rod near completion.pics to follow.
Forum: rodboard 17 years ago
Ed Carr
I checked out Cabela's to make sure they still carry layout wrap jig and they still carry it. Its under rod wrappers and such comes with layout jig and hole template for $22.99. ED
Forum: rodboard 17 years ago
Ed Carr
I got mine from Cabelas along with the layout angle board with the V cut groove for marking your axises. I think a must have ,made life a lot better. Ed
Forum: rodboard 17 years ago
Ed Carr
Thanks for all the feed back. What I was attempting to do is make an all around rod for trowing swim baits and such for striped bass. I want it to be fun with 2 pounders and have enough brass the land the occasional toad. Ive been playing with the new matrix blanks . I start with a 7' blank extend it 9" and build a fighting butt in the handle in case you need to stick i
Forum: rodboard 17 years ago
Ed Carr
Hi All; Have not posted in a long time. I let to pro's answer the things they taught me. But I have a question that I couldn't find on line. I've been watching a fishing show that the fisherman is using graphite rod with a Kevlar sleeve. I have not been able to find same. I've have been building rods with the Matrix blanks but I think that the graphite sleeve they use is a
Forum: rodboard 17 years ago
Ed Carr
I read where knot doesn't hold up well when tied with fluorocarbon. Said it cuts into itself. I found this interesting because I thought it was a good knot for all lines. ED
Forum: rodboard 17 years ago
Ed Carr
I already cut about 14" off for the ub6 butt. If I don't use the ferrule for the ub2 , the handle will fit. ED..
Forum: rodboard |