SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 39
15 years ago
LY Chua
Another completed rod with Matagi Flicker 5 blank, complete with Fuji trigger reel seat and saddle guides. Max lure 150g
Forum: rodboard 15 years ago
LY Chua
Another combination of colours for this Matagi light jigging rod 25lbs class. The choosen is overkilled for its class.
Forum: rodboard 15 years ago
LY Chua
3. Achtung!
Was just thinking about a colour combination that will strike attention.
Forum: rodboard 15 years ago
LY Chua
Self style guide wrap combination, may not be a trend today, but someday it might be accepted
Forum: rodboard 16 years ago
LY Chua
11. Fishe
Blue threaded fish against yellow background, good contrast.
Forum: rodboard 11 years ago
LY Chua
Thanks Gentlemen,
It like a mythbuster program, but the truth speaks for itself.
So the backbone of the blank is NOTgoing to have any additional punch, into launching the fly off to a good distance. The straighest axis........and the fly line is the key factor.
Is it true to say that with a slower blank "cannot'' hold a long length of line out in the air on a back cast? It always c
Forum: rodboard 11 years ago
LY Chua
Folks....
I will be building a 4 pcs 7wt fly rod blank. and would like to max out the casting ability of the blank to deliver a large fly for saltwater use.
Do I now align the lower two piece of the blank like a conventional rod and the top two piece of the blank like a spining rod?
Or all should be in the same alignment from tip to butt.
Which direction is the rightful, and how is the alig
Forum: rodboard 15 years ago
LY Chua
25. Epoxy shelf life
Hi All
I bought a dozen of epoxy and have stored them over a long period, the bottle and packing is already yellow and sticky all over.
If I were to use these on my customers rod will it compensate the strength and finishing of the finish products, while I continue to use the recently order epoxy which are both clear in the packaging.
Or it is better dispose it safety or making some pa
Forum: rodboard 15 years ago
LY Chua
Hi All,
Like everything in the Art scene, rod building is considered as a work of Art for individuals and whether it could be admired by others is simply another add-on. Unlike the Fashion scene, you may considered it as a art but it constant influx of varities of the same things put together has created a fashion show of the latest trend..Do you consider showcasing your Rod Building works is
Forum: rodboard 16 years ago
LY Chua
Hi Tom,
Thanks for your insight into the matter from your persepctive.
It is good to know which directions is RM Mag heading.
This is good information.
Cheers
LY Chua
Forum: rodboard 16 years ago
LY Chua
Hi Tom,
Looking at the amount of traffic generated by the community of both Professional and Amateur Rod Builders in this forum, it is well that the community has achieved a reputation of savvy computer Rod Builders. Inline with this, is there a possibility in the near future that the RM Mag can be made available for immediate download or distribution using the internet to subscribers?
Can
Forum: rodboard 16 years ago
LY Chua
You can get a small pin to punctual into the bubble, if the bubbles are big enough. This allows the new epoxy coating to fill up the air gap.
On the other hand, you can also use the miniature file set, to level any undulating surface. I use this method many times with success.
Do give a try.
Cheers
LY Chua
Forum: rodboard 16 years ago
LY Chua
Almost the same question in my mind!
I recently use a combination of lite and regular as finishing coat.
The lite coat while coated thin soaks into the crevices of the guide foot and so forth.
When it comes to butt wrap, it will coat over but will not form a layer over the threads.
On one hand it eliminates the formation of bubbles, (although it can be remove by using a alcohol torch)
Forum: rodboard |