SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 64
13 years ago
Scott Redmond
Here’s a side shot of which shows inlay of paduk, yellowheart and black veneer. I tied the same inlay into the reel seat of the rod.
Forum: rodboard 13 years ago
Scott Redmond
This is a look at the bottom of the handle. I inlayed a Hex larva in flex coat high build. The epoxy inlays on this rod were clearly inspired by the work of Terry Henson. Thank you Terry for sharing your photos and information on this board. I have realized even more just how amazing your inlays are after giving this a try.
Forum: rodboard 13 years ago
Scott Redmond
This is a photo of the top of a handle on a 6wt I just finished. Cocolobo and blue mahoe wood with yellowheart and black veneer accents. Inlayed a streamer using flex coat high build.
Forum: rodboard 14 years ago
Scott Redmond
Handle is a combination of olivewood, canarywood,cocobolo, black veneer, and white styrene.
Forum: rodboard 14 years ago
Scott Redmond
7' Casting Rod and 7'6" spinning rod built on a 3wt matrix fly rod blank. Spinning rod was built as an ultra-light setup for Crappie.
Forum: rodboard 15 years ago
Scott Redmond
Ready to be wrapped. Turned with Afzelia burl, ebony and canary wood.
Forum: rodboard 15 years ago
Scott Redmond
7. Diamond Wrap
Basic diamond wrap on a St Croix SCV spinning rod.
Forum: rodboard 15 years ago
Scott Redmond
5S66MF St Croix blank. Handle and seat was turned from marblewood.
Forum: rodboard 16 years ago
Scott Redmond
10. split grip
first attempt at a split grip. 6'6" CTS spin blank.
Forum: rodboard 16 years ago
Scott Redmond
11. First Split Grip
Burl and rubberized cork with black eva accents. wrapped reel seat with thread and added decal.
Forum: rodboard 16 years ago
Scott Redmond
Grizzly hackle and jungle cock inlay on CTS 6'6" spin blank.
Forum: rodboard 17 years ago
Scott Redmond
Not sure exactly what to call this pattern. I was experimenting with a box pattern and it turned into this. Used rust, Charcoal and gunmetal thread.
Forum: rodboard 17 years ago
Scott Redmond
14. 9'0" 6wt fly rod
3 pc Rainshadow blank. Handle has rosewood and yellowheart inlays. Reel seat is rosewood.
Forum: rodboard 17 years ago
Scott Redmond
15. 4 wt fly rod
Built on a 4wt forecast blank. The handle was turned by Les Freiborg. He did a great job with it.
Forum: rodboard 18 years ago
Scott Redmond
17. Spin Rod Handles
7'rainshadow spin blank with rosewood and yellowheart handle. 6' blank with purple, pink, and gray eva foam handle.
Forum: rodboard 18 years ago
Scott Redmond
Used about 5 different colors in this one. Unfortunately the camera flash really highlights out the green blank.
Forum: rodboard 18 years ago
Scott Redmond
First attempt at a thunderbird. Initially I planned a closed wrap but had the spacing wrong. Decided to go with it as is. You live and learn I guess...
Forum: rodboard 18 years ago
Scott Redmond
21. Spinning Rods
6'6" and 6'0" light spin rods.
Forum: rodboard 18 years ago
Scott Redmond
This is a size 12 panfish jig I epoxied into a rod handle. Will be used on a 6' light spinning rod. Still need to sand edges down and seal cork.
Forum: rodboard 17 years ago
Scott Redmond
23. 8'6" 4wt fly rod
3 pc Rainshadow blank. Handle was turned by Herb Knowlton. I added some threadwork and inlayed the feathers. Covered with Flex Coat Lite.
Forum: rodboard 17 years ago
Scott Redmond
This was my first attempt at layering multiple feathers. Unfortunately, they shifted on me a bite as the epoxy dried.
Forum: rodboard 18 years ago
Scott Redmond
Used underwrap of purple metallic HT braid and metallic pearl, purple, and pink wraps.
Forum: rodboard 18 years ago
Scott Redmond
Brown and red burl cork with purple foam inlays. Tulipwood reelseat.
Forum: rodboard 18 years ago
Scott Redmond
Stripper guide wrap with Garnet and silver metallic thread. Guide is a SiC pac bay.
Forum: rodboard 18 years ago
Scott Redmond
Basic diamond wrap. Garnet underlay thread, pearl metallic, charcoal, and silver metallic. This is build #3 for me.
Forum: rodboard 18 years ago
Scott Redmond
This is an acrylic reel seat made by Dave Winslow. Used on 7'9" rod.
Forum: rodboard |