SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 23 of 23
18 years ago
kenny cuddeford
10. strip cast rods
from bottom to top my first second third and fourth rods ever built.
Forum: rodboard 14 years ago
kenny cuddeford
i use the grey 3m quite often.. i find it at orchard hardware or ace hardware.. i would like to get some of the black stuff but i need to order it..
Forum: rodboard 17 years ago
kenny cuddeford
the black h ring batson guides have passed my test hands down with little to no washing for over a year in the surf on a few of my rods.i like them..they are actually on all but one of my rods now.wich is the one i just finished with the alps guides on it.i have not had a ring pop out yet.i have had a few single foot #6's lay down a little at my tip but only on 1 rod so i am thinking it was user
Forum: rodboard 17 years ago
kenny cuddeford
i like the buffalo alcohol torch very good for burning fuzzies and busting bubbles.buffalo dental mfg.co.inc
Forum: rodboard 17 years ago
kenny cuddeford
i use my plumbing torch..turbo torch either with propane or map gas..i usually have both..i also the buffalo torch.the alcohol torch plastic squeeze bottle with the pin point flame blower thingy..
Forum: rodboard 18 years ago
kenny cuddeford
i made a rod holder out of abs with and a hose clamp to attach it to a fixed location.like the top rail of my kids bunkbed.. with slotts for the triger so the reel stays up,casting or the reel foot down spinning,to place my rod in.with the tip and reel on.i tie a seperate line to the tip and load it up.like tie it to their toy box or a boot.with the guides fastened with rubber bands where i think
Forum: rodboard
Current Page: 1 of 1
|