SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 8 of 8
10 months ago
Joe Henary
I don't see anywhere in this thread about the intended application, but I would add that if using braid with a flouro leader you may want to step up your runner size. I have 4.5 torzites on my go to rod and if I use 20lb yozuri leader I'm fine. If I try to use 30lb leader it's a pain in the rear.
Forum: rodboard 1 year ago
Joe Henary
I recently ran into this same issue. A wad of masking tape did the trick for me.
Forum: rodboard 1 year ago
Joe Henary
The Pac Bay Minima seat fits nice as well. The rear does not require an arbor but the front does. And I didn't do what Norman suggested about assembling the grip and seat first but I had already decided to do that next time. Air couldn't escape and kept trying to push them apart.
Forum: rodboard 1 year ago
Joe Henary
I'm building a 7'6" heavy spinning rod using a KR concept guide layout and I have a question about the 4th guide placement. 90 inch blank with the spindle 14" from the butt 4000 size reel shows 20H,10H,6L with the following positions:
Stripper Position beyond spool axle tip: 21.5"
Stripper to Second Reduction Guide: 8.94"
Second Reducer to Third Reduction Guide: 7.81"
Forum: rodboard 1 year ago
Joe Henary
John Nesse Wrote:
-------------------------------------------------------
> I'm sorry for creating confusion. I am using KL-H
> reducer guides (in my previous post, I said KL
> when I should have said KL-H). I also said 5 when
> I should have said 5.5. The reduction train is
> the one you described: KL16H, KL8H, KL5.5M.
>
> Norm, you said that if you were building
Forum: rodboard 1 year ago
Joe Henary
I like the fact I don't have to zoom in to read the forum while on my phone.
Forum: rodboard 1 year ago
Joe Henary
Has anyone found the android app or the NFC carbon fiber reel seats?
Forum: rodboard 1 year ago
Joe Henary
So whatever happened to these? Were they released? I've checked the NFC website, Edge Rods website, Google search...
Forum: rodboard
Current Page: 1 of 1
|