SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 7 of 7
4 years ago
Mário Santos
just something more...after space guiding the rod according to the ngc system i ended up with two possibilities for the reduction train:
1: only 2 guides with a 25 mm stripper at 120 cm from the spool
2: 3 guides with a 30 mm stripper at 81 cm from the spool
i intend to test cast both ways, yet i would like to know yours opinions in advance about which one will work better
thank you
Forum: rodboard 4 years ago
Mário Santos
herb canter Wrote:
-------------------------------------------------------
> When i list guides whether it be reduction or
> running it's never a " Set in stone" type of thing
> , there is no way for me to tell how many runners
> a 13 + foot blank will require , the number of
> running guides i listed is just a ballpark figure
> and meant to give you more of th
Forum: rodboard 4 years ago
Mário Santos
herb canter Wrote:
-------------------------------------------------------
> First two would be my preference.
>
> * 25, 16,10,6,6,6,6,6,6,6,6
>
> * 25, 16, 12, 7,7,7,7 ,7,7 7, 7
>
> If a 25 is not doable the below would work and
> would be acceptable for heavier lines also .
>
> * 30,20,12,8,8,8,8,8,8,8,8,8,
why 8 running guides on the first two an
Forum: rodboard 4 years ago
Mário Santos
vou usar um daiwa basia qdx com bobines de origem de 66 mm e bobines mv de 70 mm
a bullet que encomendei é a hi-flex gt (glass tip). desculpe o que escrevi entre parênteses...sabe tudo isto concerteza muito melhor que eu. escolhi-a para poder lançar em otg com chumbadas de 170-180 gr+isco, com linha 0,25 no carreto+chicote cónico, quando é preciso procurar o peixe mais fora, e com chumbadas mai
Forum: rodboard 4 years ago
Mário Santos
Nuno Paulino Wrote:
-------------------------------------------------------
> Herb already said everything but i just want to ad
> the Microwave guides. I have them in almost all my
> surf rods and they really work well.
>
> Se por acaso fores Português se quiseres entra em
> contacto comigo para ver se te posso ajudar.
sim, sou português. muito obrigado pela oferta d
Forum: rodboard 4 years ago
Mário Santos
herb canter, thank you very much for all the information. much grateful
Forum: rodboard 4 years ago
Mário Santos
hi all. as i'm a complete beginner on rodbuilding i beg you not to be very hard on me
i just bought a zziplex bullet blank 4,12 m long (two unequal sections) that i intend to use with a daiwa reel with 70 mm width spools filled with .25 mm mono and .26-.57 mono shock leader. should i use the ngc for guide spacing or static guide placement ? and which guide size ?
thank you
Forum: rodboard
Current Page: 1 of 1
|