SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 9 of 9
4 years ago
Mitchell Martin
I use a size 16 and the rest size 12. Usually 2-3 12s. Then find the biggest tip top i can get with the correct tube. No problems if a little ice builds up since guides are big
Forum: rodboard 4 years ago
Mitchell Martin
Simply because I am out of threadmaster high build. And have flex coat on hand
Forum: rodboard 4 years ago
Mitchell Martin
I am wondering if anyone has any thoughts on using two brands of epoxy together. Through some research i found some people mix 2 brands before application. What i want to know is putting one on and drying, then apply 2nd. I have threadmaster lite on and dry. Can i put a coat of flex coat high build over it? Thanks in advance
Forum: rodboard 4 years ago
Mitchell Martin
Thanks for all the helpful tips. I put a sleeve over it and rewrapped the buttwrap. Added an additional wrap under the tie off wrap and the sleeve is barely noticeable.
Forum: rodboard 4 years ago
Mitchell Martin
I have already stripped the handle. Just wasn't sure if was possible to get the original results. Thought would bounce this off you guys before proceeding
Forum: rodboard 4 years ago
Mitchell Martin
6. Broken rod
I will skip the story and get to the point. Is there any way to fix a break right at the fore grip? So that the rod will perform to original. Thanks in advance
Forum: rodboard 5 years ago
Mitchell Martin
7. Re: Trading
I would imagine i do. Like i mentioned, most are pro wrap, a few fishhawk and fuji mixed in. If you know the item number your after.
Forum: rodboard 5 years ago
Mitchell Martin
8. Trading
Is there a site available where builders can trade items? I.E. i recently decided to switch to C & D sized thread. I now have 50+ spools of barely used, unneeded prowrap.
Forum: rodboard 6 years ago
Mitchell Martin
Ice blank tip tops from either janns netcraft or sportsmans direct have smaller tube and ring options.
Forum: rodboard
Current Page: 1 of 1
|