SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 5 of 5
7 years ago
Jeffrey McCulloch
OK, so I got a replacement tip section from Lamiglas. But it looks as though this was either not made long enough or someone cut it down too short. It is about 1/2" shorter than my mid section and my original tip section. So, in turn, the ferrule on the tip to mid sections only fits together about half to three quarters of the way, still looks like it should go on about another 1/2"
Forum: rodboard 7 years ago
Jeffrey McCulloch
Totally understand, that's why I was hoping this forum might be like my oasis in the desert, and hopefully maybe one of you fine gentleman may hold the gold nugget I've been looking for lol. My efforts might be futile, but I'm just trying to fix the situation bad best I can at this point. I'm open to any ideas and suggestions anybody's got to get myself back on track with this build. I even hea
Forum: rodboard 7 years ago
Jeffrey McCulloch
I've heard the same from a few different people. If the cost was minimal, I'd still take a shot on a used tip section. I dropped the rod off today to an older gentleman local to me, water wizard in Hburg, NY. He says he can fix it very close to new and it will be hardly visible, all with an external sleeve. I can't see it being barely visible with a sleeve over the break wouldn't that part be
Forum: rodboard 7 years ago
Jeffrey McCulloch
Called Lamiglas first thing this morning, they have nothing available unfortunately. I think the rod has been out of production for about 8-9 years now. He said to try mudhole as they sometimes have old blanks and tip sections left around, tried there as well to no avail. I talked to a builder close to me out of Utica, NY and he recommended getting on here and seeing what you guys recommend, o
Forum: rodboard 7 years ago
Jeffrey McCulloch
Just joined the forum, started my first strip and rebuild on a 13' 3pc Lamiglas Certified Pro Light 6-10# X 13 LS. I think it was also listed as an XSH 156 3L. Due to an unfortunate accident with my brother's kid, I now need a new tip section lol. About 8-10" snapped off the end. I took the rod in to a local rod builder who swears he can fix it as close to new as possible but I'm not too
Forum: rodboard
Current Page: 1 of 1
|