SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 9 of 9
9 years ago
Zai Kwan
Thks Jim
Recently I did some colour shift ...here how it looks like..
Forum: rodboard 9 years ago
Zai Kwan
Just per my experience
I would use sanding blocks such as the photos below and wet sand them while using the power wrapper as a lathe ...Aways start with the smallest grit sand paper yet at high speed just lighty over the uneven coatings. ...This will allow you to scuff parallel to the rod ...but not suitable for the humps on the guide foot...
Its best to have a sanding block that are padded
Forum: rodboard 9 years ago
Zai Kwan
Good to hear that Tom those words are encouraging
I have always a lot of ideas that popped up ...so builders here are in for a good treat...no worries Tom I can assure you that
Forum: rodboard 9 years ago
Zai Kwan
Thks guys
I really appreciate them ..convinced me that im doing the right thing for the masses ..indeed you are right Tom on your insight ...touched me deep down....and thanks bill, all these process is about sharing and learning and to execute differently. I learned much from your wise words for that thank you.
Afterall, rodbuilding is about passion in one life which none could understand
Forum: rodboard 9 years ago
Zai Kwan
well thanks guys
You gotta to try it on your own ...it will be an experience you never forget once you master the marbling techniques...and its really dead easy...
I wonder if I could find an investors to make cds and books for sale on this new marbling techniques.......
im sure many of you will want to see me in tv how I do it on actual rod and blanks...a cd that is upclose on how I do
Forum: rodboard 9 years ago
Zai Kwan
Hi guys some new stuff I marbled today
Hope to hear from you
Have a nice day
Zai kwan
Forum: rodboard 9 years ago
Zai Kwan
Hi dave
I will reveal the pros and cons of marbling in the article that Tom had given me the opportunity ...
so lookout for the issue...k you
You will be in for a real treat and shocked that my techniques is the fastest yet able to achieve the third dimension effect...
thank you for the comments I really appreciate them...
have a nice day ahead
zai kwan
zai
Forum: rodboard 9 years ago
Zai Kwan
Hi im new here
just to share some of my works..do comment ..will be interesting to hear from you guys...
and my deepest thanks to Tom Kirkman
tight lines and thanks
Zai Kwan
zaifry@yahoo.com
Forum: rodboard 9 years ago
Zai Kwan
Think you can try vertical jigging blanks ..15-30lbs
Light weight yet strong ...test them
Buddy
Forum: rodboard
Current Page: 1 of 1
|