SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 5 of 5
8 years ago
Pascal Kik
Have to work on my Portuguese a bit more as they hardly respond in proper English :). Will just hang on for a moment more, hope it's worth the wait
Thanks for the replies
PS. I'll try to put it on Bill's tab Ron ;)
Forum: rodboard 8 years ago
Pascal Kik
Hi Guys,
Anybody here experience with the sponsor cork 4us on this forum? I tried to order some cork but a reply from their side takes ages... Placed an order over two weeks ago and by now the only response I had was they are tuning the machines, some of the product out of stock. blablabla.. Is it worth the wait or shall I seek for an other company?
Kind regards
Forum: rodboard 9 years ago
Pascal Kik
Well I found out the hard way unfortunately..
The finish looked great but when I used some masking tape to hold the guides in place I ripped off some flakes of the varnish when the tape was removed. The rod sat for a couple of days already and the varnish should have been hard through and through. Next time no PU varnish for me!
Thanks for the replies though.
Pascal
Forum: rodboard 9 years ago
Pascal Kik
Thanks Tom for your reply. Anybody bad experience with a product like this?
Forum: rodboard 9 years ago
Pascal Kik
Hi Guys,
Has anybody experience with varnishing a fiberglass rod blank with a PU based wood varnish? I would like to try a varnish from a brand called Glitsa (probably not everybody is familiar with). This type of varnished is used for wooden furniture but as well as a finish for concrete. As it is PU based it is claimed to be very durable to scratching. What's your opinion about using a varni
Forum: rodboard
Current Page: 1 of 1
|