SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 528
15 years ago
Milton (Hank) Aldridge
Hi Jason,
What type of rod are you building (Spin or conventional)? How long is the rod blank? It maybe that your rear grip will come up far enough so you will not have to ream the reelseat. Fact is you should not have to ream a reelseat. I would say that the reelseat you have maybe to small. One think to check is that you reel will seat properly onto the reelseat. If you have a reelseat
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Billy,
Unless I'm mistaken that is a drill press attachment you see in your photo not a router attachment. Dremel has a new drillpress attachment. Here is just one link I've found and I'm sure there's more
I'm listing the link here because I don't think any of the board sponsers have such items.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
I think mine gets routed through China because it arrives via Sandpan!!!!
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Erik,
The PacBay RW3-XL is a good choice. It's a little more money but you get a much better chuck on this model.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Bob,
Nice to see you here again. I will shoot you an email in a while. We do a lot of spiral Wrapped rods and call them "Maine's Wicked Twisted" because they're Wicked Good (a little bit of Maine Humor there).
Matt,
If you have ordered the issues from RodMaker Magazine that cover Sprial Wraps that is a very good start. As far as using a simple sprial vs a (so called) re
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Pete,
Contact Mike Barkley mbarkley@wowway.com He does alot of Quarters in the handle.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Tom,
Try this:
Then static test to tweek guides
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Josh,
The info the above gents have given you is spot on ( I really likes Steves post - LOL). The big thing you have to be thinking of is your payment. How is he going to pay you? Be very sure you get payment in U.S. funds only or the exchange rates may get you. If he is paying by check or money order be sure to check with your bank to see what their fees are for cashing foreign payment
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Lou,
Your email address is hidden, unhide it or email me at Hank@OnTheRocksFishing.com. I may be able to help you.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
10. Re: 720 form
Hi Mike,
Here is the telephone number to the IRS section that handles form 720 - 1-866-699-4096. They can answer any of your 720 questions in fact they are the only ones that can help you. If you try any of the other IRS sections you will get no help and that includes getting the correct telephone number needed. It will do you well to write down this number and keep it. If you ever make an
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
11. Re: Cork tape
Hi E,
Yes you should create a Water Brake Free surface with a gray scotchBrite pad. Here is instruction for doing so:
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Duane,
You have me confused. What do you "something flat and not round"?
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Don,
I run into this all the time. Because the original price they paid for the rod they do not want to replace the all the guides. I use Perfection guides and they are usually close enough. Also I think PacBay makes a guide close to what you need. Just be sure to check and see if they are braced or unbraced guides. As for the guide size talk that over with whoever you order from, most
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Jimi,
I hate to critize someones web site but I found your color comb. very hard to read. It strained my eyes to read it. Sorry.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Marty,
Use "A" fie under & over wrap. Lay down your underwraps, apply a coat of epoxy finish then do the overwrap. The reason for the epoxy is so the overwrap does not does not fall down between the underwrap threads. Some people use color preserver instead of epoxy but I found epoxy easier for me.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Marty,
If you prep your guides properly you will not need a underwrap.You need to be sure that there are on spurs and anything else that can cause damage to the blank. On almost every saltwater rod we build we do underwraps because we like the looks of them but they are not necessary.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
18. Re: New Issue
Hi Tom,
As always you have something for everybody. Myself I'm very interested in the Scrimshaw Art. I'm hoping it's an article that will give instructions in doing and not just an article about it. Time will see if I get my wish.
I have a request for articles and that is to bring back The Bamboo Corner. Maybe a new updated version. I may never build a Bamboo rod but I did enjoy thoses
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Dave,
I think Rod Smith is made by Pac Bay and if so contact them and they will take care of you. You can get their info on the list on the left hand side of this page.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Thanks Jim, that was my question. It looks as if 4 guides were place within 2 inches from the tip. I know that can't be right. It must be the distance between guides.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
21. Re: armorall
Hi Stanford,
I have used Armor All on my rods for years. You can use it on fly line if you don't mind having the color removed from the line. Do not use it on handles because it makes them to slick to hold. No problem with silicone unless you spray aroung your rod building equipment.
I maybe wrong but I feel that Armor All helps provide UV protection as I have never had guides fade on my
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
22. Re: New Sponsor
Hi Tom,
That's great, it has to take a little of the load off you to have all your sponsers full.
Welcome to Scott's Custom Rods and Supply.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
H Greg,
If I'm reading your info correct you placed 4 guides in a 2 inch area, is this correct?
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Dave,
We use a lot of Batson's SWB series blanks and love them.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
If it ain't broke don't fix it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Bill,
When I'm having trouble Iding a guide I take a photo of the guide and email it to a dealer with the rod's info and they usually come up with the correct replacement.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Alex,
Sorry but I totally agree with Fred. Why should you be held to any less standard then myself or other builders. When I setup my wholesale accounts I had to show my State of Maine reseller's certificate showing that the items purchased was for fishing related items as what was stated on that certificate. Some dealers also requested a copy of my Federal ID number. If you do not have
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Mike,
When you converse with Scott be sure to ask him about his little foam mixers, they are the neatest little items.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Harold,
That one that's on Youtube is different then the other Discovery channel video. The one you have listed on Youtube is better than the other one. It shows a little more than the other video. Thank you for sharing this info.
Forum: rodboard 15 years ago
Milton (Hank) Aldridge
Hi Kenneth,
I do not know anything about the company you are talking about but you should contact your credit card company and file a fraud report with them. I think you maybe able to get your money back through them. Also file a fraud or thieft by deception report with your states att. General's office. Good luck.
Forum: rodboard |