SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 16 of 16
18 years ago
Russ Wilson
Jeff
If the motor is a sewing machine motor. You can reverse them by changing the wiring on the brushes inside the motor. I just did two of my own. Reversing the plug wires don't work.
Russ
Forum: rodboard 18 years ago
Russ Wilson
Aaron
There is a really good article in Rod Maker Magazine on the Acid wrap or the spiral warp. Volume 8 Issue 2 page 16
Russ
Forum: rodboard 18 years ago
Russ Wilson
Kenneth
I like a 9'6" 6wt. 3 piece RX 7 Rainshadow from Batsons. The steelhead have worked this rod over. It has preformed very well. This is the rod I use for steelhead and trout the most.
Forum: rodboard 18 years ago
Russ Wilson
Thanks for all the input.
It is nice to see a forum where everybody is willing to share there knowledge.
I hope to meet you all in Charlotte.
Thanks Again
Russ
Forum: rodboard 18 years ago
Russ Wilson
I was talking to a local rod builder and ask him about single foot ceramic guides on fly rods he said not to use them. They hold the line off the blank when cast it will put a twist in the blank and throw the cast off. Is this true?? Are there some cermic guides better than others? I have a few fly rods to build and was hoping to put ceramic guide on them. What are the pros and cons to snake gui
Forum: rodboard 19 years ago
Russ Wilson
I have a customer that wants a minnow rod built on a fly rod blank. He wants the rod to be 8’-8 ½’ and use 4lb.to 6lb. line. My question is what weight rod blank do I use and has anyone ever done this. The rod will be used on Pennsylvania’s small steams for trout.
Forum: rodboard 19 years ago
Russ Wilson
Is there any pictures of the cork grading scale on the net.
Forum: rodboard 19 years ago
Russ Wilson
Jay
That is a beautiful inlay I don't know if it can be redone:)
Forum: rodboard 19 years ago
Russ Wilson
I don’t have a lot to report. There is very little information on this subject. This is what I have. The Aquatic Insects are inlayed in clear polyester casting resin. Here is the problem they have to be dry. If anyone knows how to freeze dry insects the information would be greatly appreciated. I did find a book titled (can’t find the book anywhere!!!) How to embed animals and other scientif
Forum: rodboard 19 years ago
Russ Wilson
Thanks to all that replied to this post. I will be researching more on this subject. When I come up with something I will let you all know.
Forum: rodboard 19 years ago
Russ Wilson
I saw a picture of Caddis Larvae Inlaid in a fly grip. It really looked nice. Does anyone know how to preserve aquatic bugs and inlay them. It looked like they were in epoxy or some kind of acrylic.
Forum: rodboard
Current Page: 1 of 1
|