SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 15 of 15
12 years ago
kevin holzhauer
3. IMAG0168
First wrap i did wasnt tightenough when i put on cp the threads shrivelled up so i had to cut it off an this is the re do..
Forum: rodboard 12 years ago
kevin holzhauer
5. shark rod
Looking into building a shark ...any sugestions on blank n guides
Forum: rodboard 12 years ago
kevin holzhauer
Ive been using the blue sable brush an ive noticed that some points of the finish come out smooth then others...any tips on gettin the finish applied evenly especially on the guides..
Forum: rodboard 12 years ago
kevin holzhauer
Ive been wrapping my +1s with individual passes ,jus wondering if theres a better or fast wayto wrap multiple threads ...
Forum: rodboard 12 years ago
kevin holzhauer
Just curious as to what to use to paint the guide feet after i file them down to sit on rod properly?..tried using a sharpie the last time n it actually bled all the way thru the light blue thread...
Forum: rodboard 13 years ago
kevin holzhauer
11. madeira
wats up guys...i started using madeira thread on my rod wraps jus a quick question ...is the madeira too weak wrap the guide itself...as i was doin under wraps a fews times i got hung up pullin tabs thru an it snapped very easily ...should i avoid wrapping the guides themselves in madeira
Forum: rodboard 13 years ago
kevin holzhauer
looking for a good liveliningblanks for the stripers...been lookin at calstar graffighters n seekers ...any good suggestions
Forum: rodboard 13 years ago
kevin holzhauer
LOOKIN FOR A GOOD CHUNKIN & CLAMMING ROD TO BUILD FOR BASS...SUGGESTIONS?
Forum: rodboard 13 years ago
kevin holzhauer
THANKS ALOT TOM..I ALREADY KNOW WHAT IM DOING WRONG THAT HELPED ALOT..MUCH APPRECIATED
Forum: rodboard 13 years ago
kevin holzhauer
WHATS UP GUYS NEW BUILDER AN NEW MEMBER TO SITE..HOPEFULLY YOU GUYS CAN GIVE ME SOME POINTERS ON A FEW THINGS...FIRST HAS TO DO WITH COATS OF FINISH..
AFTA 2ND COAT WHEN THREADS R PRETTY MUCH EVENLY COVERED I GET SOME HIGH SPOTS N LIL BUMPS...ON MY FIRST ROD I JUS WENT RIGHT OVER WITH NEXT COAT AN IT STAYED COMPLETLY THE SAME....IS THERE SOMETHING IM MISSING BETWEEN COATS THAT I SHOULD B DOING .
Forum: rodboard
Current Page: 1 of 1
|