SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 46
9 years ago
tom mcfee
He fishes the same places I do and last time we talked on the water was june.Will drive by his house soon as i can and let you guys know.
Forum: rodboard 9 years ago
tom mcfee
I really like KT guides the braid line does not get tangle up on the on the guides
Forum: rodboard 9 years ago
tom mcfee
This is what work for me with a stradic 2500 reel all measurements are taking from the end of the spool shaft kl16h 22 inches kl8h 29 inches kl5.5h 34.750 and kt4.5 or 5 runners first one is 40 inches that the choke point.You might want to try this my rods with this set up cast great and with a bunch of testing have not found a better set up with those guides
Forum: rodboard 10 years ago
tom mcfee
Mark I have 7 2500 Stradics and have made rods on these blanks Batson SXW76ML XSW72ML REVS610MXF Lamiglas PRO842 IMP843 MHX SJ841 MHXSJ782 MHX8600. I have made them with Aero reel seats, fuji sk2 reel seats and regular reels. Some with carbon fiber grips and eva. I live in the Cape Fear area. If you live around here you are more than welcome to check out these blanks and see it
Forum: rodboard 10 years ago
tom mcfee
Not sure about the nickel but stainless 316L is low carbon and I get no staining or tarnish using in saltwater in 3 years.Thats a about 2 hundred fishing trips and I don't rinse them as good as I should. I just looked at one, it's 3 years old and there's no rust or tarnish. Looks like I just install it on the rod. I can email a pic if anyone needs one.
Forum: rodboard 10 years ago
tom mcfee
I make my own out of 316L tig welding rods .030 and .045 dia and they last forever.
Forum: rodboard 10 years ago
tom mcfee
Thanks guys for the support. Mike I'm trying to copy what I saw you had and I'm just not real sure of myself and if I got it right. I'll see you guys at the show. Thanks again. Tom
Forum: rodboard 10 years ago
tom mcfee
Hey guys I'm going to be attending the ICRBE Expo and I'm working on redoing a St Croix 7.6' med light bast caster. I'm trying to do a slow spiral wrap with 3 guides transitioning from 0-180 deg. I've been doing at lot of research on this and done hours of reading, have the rod laid out with the guides. I just don't feel comfortable with the minimum amount knowledge of spirals that I have it l
Forum: rodboard 10 years ago
tom mcfee
Thanks Roger, I have a bunch of fuji hardloy guides and was thinking of using a BNLG10 or 8 for a butt guide and 4 BNLG7 to transition to 180 deg and then BLG 6 fly guides to the tip and see how it works. If that does not work I will just keep playing with it till something works with inexpensive guides and then buy some better guides.
Forum: rodboard 10 years ago
tom mcfee
Because I like shorter rods for wade fishing and shorter handles. Also I don't think I need all the backbone the tc76mf has.
Forum: rodboard 10 years ago
tom mcfee
I got a shimano c4 baitcasting reel for Christmas and am going to attempt to build a spiral rod. I have 2 blanks stripped down to the bare blank, a St Croix tc76mf and tc76mm. I am thinking about cutting 6 inches off the butt to make them 7 footers. I am not sure which spiral system to use. Also, I don't know what size butt guide and transition guides I should use to make the spiral. By readi
Forum: rodboard 10 years ago
tom mcfee
I have the sj841 its ok for the money also have a Batson xsw72ml that I like a lot better for the same jigs you are throwing
Forum: rodboard 10 years ago
tom mcfee
Thanks Roger I hope you are going to the ICRB and I get a chance to pick you brain a little
Forum: rodboard 10 years ago
tom mcfee
Roger I looked at photos of you set up super cool. Is the dc motor power supply and foot pedal hard to find?
Forum: rodboard 10 years ago
tom mcfee
18. Customer service
Whats up with Git Bit Outdoors customer service? They call when something you ordered is out of stock. I'm not sure how to handle that. It's never happened before by any other company, they just don't send what is out of stock. Nice job Get Bit!
Forum: rodboard 10 years ago
tom mcfee
Mike have you build the the rev561mxf-sb? and if so what did you think? I am looking for a extra fast one to build
Forum: rodboard 10 years ago
tom mcfee
Hey guys thank for your replies. Have spent a few hours casting different rods with a 3/16 oz lure today. Most are 7ft ML I have a Shimano CSS-86ML 8'6" lure wt1/4-3/4 line wt 6-12 power ML action medium fast IM-7 graphite that outperforms the rest. So I am thinking a good 8'6" to 9' ML blank would be good choice as this rod is being built to catch speckle trout and small redfish 2lb
Forum: rodboard 10 years ago
tom mcfee
I am looking for a blank to cast yo-zuri lures 1/16 to 1/4 oz, will be using a stradic 2500 and 1000 reel 6 to 8lb braid line. The most important factor is long distance casting, length of the rod is not a factor any help would be appreciated.
Forum: rodboard 10 years ago
tom mcfee
The rod cast good just messed up on the new concept system. I lined up my straight edge to the center of the guide ring and not to the top of the guide.
Forum: rodboard 10 years ago
tom mcfee
I built a rod this summer a Batson sxw76ml which they don't make any more. It stinks my favorite rod. I would like too change the reduction guides to higher and small ones to bklag high frames so the location would not be the same as the guides removed. I can't see how i could do this without damaging the finish of the blank. Any thoughts on this would be big help
Forum: rodboard 10 years ago
tom mcfee
26. guide placement
I am building a batson xsw72ml spinning rod and using fuji k series guides bklag high guides 20-10-5.5 and bktag 5.5 as the runners should my choke guide be a 5.5 high guide or a 5.5 runner
Forum: rodboard 10 years ago
tom mcfee
This isn't a regular 3 jaw scroll chuck where you can drop a jaw in one at a time. I've taken apart a lot of 3 jaw chucks at work, but this chuck you have to have all 3 jaws in it at the same time to put it together.
Forum: rodboard 10 years ago
tom mcfee
I have a Dale Clems 3 jaw chuck that was bought in the early 80's. Sat in the garage for 25 years and rusted up. Got it out and cleaned it up. I have completely taken it apart and can't figure out how to get the 3 jaws back into the chuck. Is anyone familiar with this type and have any idea of the manufacturer or how to get the jaws back in. Any info would be appreciated. Thanks
Forum: rodboard |