SPONSORS
2024 ICRBE EXPO |
HELP... with pac bay power wrapper
Posted by:
dave haase
(---.dyn.optonline.net)
Date: January 28, 2004 10:43PM
so, I got the power wrapper a few weeks ago... from the very beginning, I have be hearing a hi-pitch squeeking noise coming from the spool tension device (STD). I have unscrewed it almost all the way to the end, there is hardly any tension on it at all, however, when I am using power, I get that noise and the thread comes out tight, then loose, and tight and over and over and the thread actually turns different shades as Im going because of how tightly and loosely the thread wraps. very unsitely.. anyway, I have heard there are problems with the STD that comes with the wrapper. anyone have any fixes for this or ideas on how to upgrade so I wont have this problem? I need this fixed as I have like 10 rods to get done and I keep trying to fix it to no avail. thanks in advance. DAve Re: HELP... with pac bay power wrapper
Posted by:
dave haase
(---.dyn.optonline.net)
Date: January 28, 2004 10:46PM
sorry, I couldnt find my last post, I thought I didnt post it, this is a duplicate... Re: HELP... with pac bay power wrapper
Posted by:
Jim Upton
(---.lsanca1.elnk.dsl.genuity.)
Date: January 29, 2004 01:11AM
Dave; You have E-Mail.... Re: HELP... with pac bay power wrapper
Posted by:
Anthony Pantuso
(---.dab.bellsouth.net)
Date: January 29, 2004 04:41PM
What kind of thread are you using? For some reason the pac bay wrapper likes gudebrod thread. When ever I use rice thread the STD makes a squeeking noise like it is screaming. Re: HELP... with pac bay power wrapper
Posted by:
Tom S. Brown
(---.olypen.com)
Date: January 29, 2004 04:47PM
Hi Dave, What you are describing sounds like the thread tensioner is not working properly. Please give Eric or myself a call at (800) 272-2229 and we will either figure out what is wrong or replace your tensioner if needed. Tom S. Brown Pacific Bay International Re: HELP... with pac bay power wrapper
Posted by:
Tom Carden
(---.fpl.com)
Date: January 31, 2004 05:29PM
Dave, I had the same problem with mine. The supplier ended up giving me the tensioner off of thier personal machine. It appears that the spring does not get the proper temper when it is made or the clear coating that the tensioner has on it sticks the parts so they do not move freely. Other than that my machine has worked great for the past 4 years. Fish Hard, Tom Sorry, only registered users may post in this forum.
|