SPONSORS
2024 ICRBE EXPO |
New from Pacific Bay International
Posted by:
Tom S. Brown
(---.olypen.com)
Date: October 03, 2003 05:42PM
Pacific Bay is proud to announce the addition of our "Rodsmith" Custom Rod Wrapping Finish to our ever growing product line. This finish is ultra clear, high gloss, UV resistant, and waterproof. The "Rodsmith" finish is offered in 2 ounce, 4 ounce, and 8 ounce kits. Contact your local distributor for pricing and more information. As an introductory offer I will send a free 2 ounce kit to the first 10 people who e-mail me at tom@fishpacbay.com. Please include your mailing address for shipping. For those lucky enough to get a freebie, please share your comments here on this board after you've tried it. Tom S. Brown Pacific Bay International Re: New from Pacific Bay International
Posted by:
bill boettcher
(---.75.91.163.Dial1.Weehawken.Level3.net)
Date: October 03, 2003 05:58PM
Tom; You probably got a mess of emails??? Re: New from Pacific Bay International
Posted by:
Tom S. Brown
(---.olypen.com)
Date: October 03, 2003 06:12PM
Hi Bill, Congratulations, you were the first one to e-mail me, you must like free stuff! I will send out your free sample Monday, let me know what you think of the new finish once you try it, I think the stuff is great, and I'm pretty picky. Tom S. Brown Pacific Bay International Re: New from Pacific Bay International
Posted by:
bill boettcher
(---.75.91.163.Dial1.Weehawken.Level3.net)
Date: October 03, 2003 06:17PM
No one else wanted to seem greedy-I guess? I like a lot of your products, and your prices are very reasonable. O ya thanks If your picky I will probably like it Re: New from Pacific Bay International
Posted by:
John Britt
(---.9-67.tampabay.rr.com)
Date: October 03, 2003 06:42PM
Bill-you are fast by now I am probably number 101 John B Re: New from Pacific Bay International
Posted by:
Christian Tanno
(200.96.4.---)
Date: October 03, 2003 06:50PM
Is that offer valid to Brazilians too ?? regards, Christian Tanno ( from Brazil) Re: New from Pacific Bay International
Posted by:
Tom S. Brown
(---.olypen.com)
Date: October 03, 2003 07:06PM
Hi Christian, I guess I should have said domestic only, I'm sorry to say that the freight to send one sample is too expensive. But please e-mail me your address and I will see if I can find one of our distributors in Brazil that can get you a sample. Thanks, Tom S. Brown Re: New from Pacific Bay International
Posted by:
Marc Schwitters
(64.140.60.---)
Date: October 03, 2003 07:11PM
Did I squeek in by any chance? Marc Re: New from Pacific Bay International
Posted by:
bill boettcher
(---.75.70.66.Dial1.Weehawken.Level3.net)
Date: October 03, 2003 07:42PM
Tom; I guess every one just came home from work?? LOL Re: New from Pacific Bay International
Posted by:
Jeffery Friend
(---.proxy.aol.com)
Date: October 03, 2003 07:44PM
Tom, did my earlier email make it? Jeffery Re: New from Pacific Bay International
Posted by:
Christian Tanno
(200.96.4.---)
Date: October 03, 2003 07:44PM
Hi Tom, First of all, thanks for your kindness. Don't worry, I can surely understand that the shipping cost is too high ( that's why I asked).... So, I know a PacBay dealer here in Brazil and I will contact him to check if he already received the finish. If not, I'll wait and, as soon as I can, I'll buy some to test .... Considering the quality of your products, I'm pretty sure it may be a really good stuff Thanks, Christian Tanno Re: New from Pacific Bay International
Posted by:
bill boettcher
(---.75.70.66.Dial1.Weehawken.Level3.net)
Date: October 03, 2003 08:03PM
Tom; Can you give us a quick run down on this clear. Thick, thin, set time, pot life Etc. Re: New from Pacific Bay International
Posted by:
Gary Taylor
(---.sympatico.ca)
Date: October 03, 2003 09:10PM
Hi Tom will new products offered in as well. i would like to try the rod smith finish. Re: New from Pacific Bay International
Posted by:
Gary Taylor
(---.sympatico.ca)
Date: October 03, 2003 09:13PM
Hi Tom offered in Canada.i did put canada in my fist post sorry about that.Thank you. Re: New from Pacific Bay International
Posted by:
Tim Stephens
(---.rockisland.net)
Date: October 03, 2003 10:29PM
I'm an hour late but I sent the e-mail and hoping it's not all gone. I have one rod ready to wrap so would like to give this a try to compare to LS and Flex. Re: New from Pacific Bay International
Posted by:
Myles Boon
(168.132.10.---)
Date: October 03, 2003 11:00PM
I hope I made it as it would be nice to try other products that are not available in Australia, like most of us I have a rod just waiting. Myles Re: New from Pacific Bay International
Posted by:
Ray Alston
(---.duda.com)
Date: October 04, 2003 07:38AM
Tom, I'm sure I missed out on being the first ten, but I'll still have to try it anyway. Last year I made a point to try all the finishes available so I could make an educated decision on which one I liked. I narrowed it down to a couple of favorites, and although I won't mention them here, they were not the most popular and were some of the newest ones out. Good luck with the new product. Ray Re: New from Pacific Bay International
Posted by:
Tom S. Brown
(---.olypen.com)
Date: October 04, 2003 05:30PM
Hi everyone, Wow, looks like I bit off a little more then I can chew, I have received 61 responses to my offer as of this morning!!!! I will respond to everyone that e-mailed me, but it will take me until Monday to get back to everyone, (The wife has a list of "Honey Doos" planned for me this weekend) I will post a list of winners Monday morning. And for those that e-mailed me, I'm doubling the number of winners to 20! Thanks for the great response to this offer!!!!! Tom S. Brown Pacific Bay International Sorry, only registered users may post in this forum.
|