Would anyone know what blanks they were built with? I am on the last one and would like to try to build one very close to it.
TIA for any info.

Rebrod, maybe.

............

the site is not working, so possibly no longer available. I was hoping it might be G Loomis blanks, but the one you listed makes more sense as it would be near to each other.

It's possible Gary Loomis might at least know who made them. Can't hurt to ask.

Would you have contact information?

If you have a blank/rod that you like and want to duplicate it, set up to do your own CCS numbers, measure it, then find a blank that closely matches. With the thousands of blanks available, and a pretty good data base of CCS numbers, it should be quite easily possible.

I don't have info, but NFC might be able to help.

I sent them an email, guess I will see what happens.

thank you
T

Rebrod was reversed by the owner to Dorber some years ago, the site was Dorber.com. Heard more about the company on fly rod sites over the last 20 years.



Edited 1 time(s). Last edit at 03/18/2024 01:28PM by Spencer Phipps.

After I did the search from the info Tom gave, I did figure that part out, and also found the site is not working, comes back with an error at the end that says "untrusted" so network solutions owns the domain, and it was renewed on 2.22.24, but that is all the info I can get on them.

Emailed nfc no response. I will have to keep searching