I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
DecalPrinters/LRTGROUP
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pages: Previous12
Current Page: 2 of 2
Re: Inletting Tool
Posted by: Tom Kirkman (Moderator)
Date: January 23, 2024 08:07PM

Spade bits for making reverse cutting bits are available in a wider variety of sizes than most realize. I have never had any issue matching a bit to nearly any size seat hood I needed to recess.There is also a little trick for making tiny adjustments if necessary, which is covered in the article.

...........

Options: ReplyQuote
Re: Inletting Tool
Posted by: Harry Sandoval (---.hsd1.ut.comcast.net)
Date: February 07, 2024 10:11PM

To follow up since I saw another thread about inletting.

I am happy with the results of the "flex coat" method I linked above, of using a spade bit, cork ring holder and drill press to inlet a single cork ring. I did drill a couple off center holes before I managed a keeper. Although I think the reject cork rings were close enough to be turned round.

I looked thru the sponsors websites to the left and couldn't find any of them selling counterbores. A quick search turns up multiple online suppliers at a substantial savings to flyrodcrafters...

I havent tried the counterbores yet, but I imagine they would make it easier to get a centered hole with just a hand held drill...



Edited 1 time(s). Last edit at 02/08/2024 09:29AM by Tom Kirkman.

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
Webmaster