SPONSORS
2024 ICRBE EXPO |
Making a tenkara/keiryu/fly/toc rod
Posted by:
Serge Thomas
(---.sub-174-211-97.myvzw.com)
Date: June 25, 2023 08:28PM
Hello, I a willing to basically invent a telescopic rod with inside rings (interline) that would be 14'7" long for euro nymphing. This would be fished with a level line #2 and a fly reel with backing for line reserve. The guides will be inside the rod blanc like European toc rods. Is it possible to build one like that? I should be super light and fast action. PS. I have found some on Japanese websites. So, they do exist. After even more research, I was able to find this article about interline tenkara. Not sure I am allowed to post links here. I have.already a super light click pawl 3d printer réel, so I just need to buy the rod and cut the tip and fit a ring. Where do I find those interline tip top?
I have found all of the information I needed from the tulipe PTFE bush for the tip top to the guide of entry into the blank. A couple of 3d printed parts and I should be good to go. PM me if you want to know how. Edited 3 time(s). Last edit at 06/26/2023 01:22PM by Serge Thomas. Sorry, only registered users may post in this forum.
|