I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

New Issue
Posted by: Tom Kirkman (Moderator)
Date: January 25, 2023 02:32PM

[www.rodmakermagazine.com]

.............

Re: New Issue
Posted by: Michael Ward (---)
Date: January 25, 2023 04:59PM

Tom - will you be planning to do a compilation of the additional magic want articles like the version first available last year ?

Re: New Issue
Posted by: Tom Kirkman (Moderator)
Date: January 25, 2023 05:23PM

This new Magic Wand Series is also by Rich Forhan but pertains to saltwater specific rod types. I might do another compilation book on this series but that wouldn't be until the series is complete, which will likely take a full year.

There will be a new special edition RodMaker publication at the Expo this year and I think it contains the most important work the magazine has done over the past 26 years - custom rod ergonomics. This is the one area that is woefully poor on most all commercially made rods and many custom made rods. It is an area where custom rod builders can easily outdo and outperform 99% of the commercially made rods on the planet. We have the research. We know the correct shapes and sizes that match the bio-mechanics of the human hand. Now it'll all be in one book.

.................

Re: New Issue
Posted by: Robert A. Guist (---.res6.spectrum.com)
Date: January 25, 2023 06:29PM

Hello Tom.

I was going through my magazines:

Vol/Issue............Article.............................................................Author.............Page.
19/4 Ergonomics Part 1, Proper Grip/Handle/Seat Diameter. By Tom Kirkman. 24
19/5 Ergonomics Part 2, Proper Grip/Handle/Seat Shape By Tom Kirkman. 24
19/6 Ergonomics Part 3, Pommels and Tapers. By Tom Kirkman. 22
20/1 Ergonomics Part 4, Surface Texture. By Tom Kirkman. 14
23/6 Ergonomics Part 7, Why Shape Matters By Tom Kirkman. 18

I could not find 5 and 6, perhaps I miss-labeled them?

Do you by any chance remember the names of the articles?



Tight Wraps & Tighter Lines.
Thanks Tom.

Bob,

New Bern, NC.

Sorry, only registered users may post in this forum.
Webmaster