SPONSORS
2024 ICRBE EXPO |
Basswood Handle with Afzelia Burl Reel Seat
Posted by:
Stan Gregory
(71.2.30.---)
Date: December 27, 2005 10:25PM Handle was built of 1/4 inch basswood, cut cross-grained with a hole saw and glued up. The grain was spiralled during glue-up using about a 3/8th inch grain advance on succesive rings. Reel seat was turned from afzelia burl wood which has been stabilized. A Jet VS mini lathe was used to turn the wood. Sorry, only registered users may post in this forum.
|