SPONSORS
2024 ICRBE EXPO |
Up my wrapping skills
Posted by:
Scott Olson
(---.sub-174-255-1.myvzw.com)
Date: September 21, 2021 08:28AM
What is the best resource for someone wanting to learn closed wraps? Re: Up my wrapping skills
Posted by:
Tom Kirkman
(Moderator)
Date: September 21, 2021 10:30AM
The only real difference between an open and closed wrap is that an open wrap is not completely filled in. So all you really need to do is keep wrapping until you have closed in the entire wrap or background. If you can do one you can do the other. There will, of course, be the usual argument as to whether or not any sort of taper offset spacing is required on closed wraps. I've rarely used it, as threads can be manipulated to fit the ever tightening area as you move further up the rod. Others swear by TOS. Get some different opinions and try them for yourself.
.............. Re: Up my wrapping skills
Posted by:
Michael Ward
(---)
Date: September 21, 2021 12:41PM
Tom - that kind of oversimplifies it a bit I feel. Having the right spacing to start is much more important in a closed wrap in my opinion - yes, threads can be pushed around - to some degree - but with an open wrap you can get away with a lot more “error” than with a closed wrap and pushing threads all over the place to close it is not fun
As to learning resources…. Billy V’s Decorative Wraps book is very valuable, and Mary McIntire has some video courses that are work purchasing in my view - [decorative-wraps.teachable.com] But reading and watching videos alone won’t get it done. Have to put in time at the bench and be willing to cut off the wraps that suck :) Re: Up my wrapping skills
Posted by:
Tom Kirkman
(Moderator)
Date: September 21, 2021 02:32PM
I would assume, perhaps incorrectly, that anyone serious about decorative crosswraps will be paying good attention to center spacing. Spacing and alignment are the two main ingredients in any good wrap.
........ Re: Up my wrapping skills
Posted by:
Mark Hahn
(---.157.18.98.static.ip.windstream.net)
Date: September 22, 2021 08:03AM
I've attended the expo for many years and listened to all the big names in the game. All offer several approaches to decorative wraps in line with their own style. But all have a few common themes. 1. Measurement and alignment. 2. Good results are like anything else, the more you do the more you learn. 3. Mistakes are going to happen. 4. Be prepared to cut it off when it goes bad no matter how far along you are in the wrap.
I followed these and other sound foundation rules and found my wraps got better right away but not without some cut offs. Make mistakes, it's part of the learning process. Re: Up my wrapping skills
Posted by:
Chuck Brezen
(---.client.mchsi.com)
Date: September 23, 2021 12:14PM
Hey Scott,
Personally, I'm a very visual person and learn quicker while watching. Mary McIntyre's videos are great! (Decorative Wraps) They're not professionally filmed (which I also like) but are so informative and easy to follow! They are just a few bucks apiece and you can watch them over-and over! It's also a great follow on Facebook - Southern Rod Builders... Mary is the admin Chuck ><))))">….><))))">….><))))">….Just Fish Prior Lake Rod Building Guild Instagram @pl_rod_building_guild Re: Up my wrapping skills
Posted by:
Scott Olson
(---.sub-174-255-0.myvzw.com)
Date: September 23, 2021 09:28PM
Thanks everyone! I too learn a lot more by watching as opposed to reading. Huge thanks for the tip on Mary McIntire. I think that is going to be a great help. Sorry, only registered users may post in this forum.
|