SPONSORS
2024 ICRBE EXPO |
New Sponsor
Posted by:
Tom Kirkman
(Moderator)
Date: December 18, 2020 10:17AM
Banana River Rods has joined us as our newest sponsor. The owner, Tony Bosch, has also penned an article on DIY Rapid Prototyping that appears in the RodMaker issue that is in the mail now. His link is in the sponsor column to the left. Otherwise, [bananariverrods.com]
............. Re: New Sponsor
Posted by:
Tony Boschi
(---.res.spectrum.com)
Date: December 18, 2020 11:05AM
Thanks Tom!
I am happy to be part of this community and I hope my articles, and services offered, can assist others in their rod building endeavors. Tony Boschi Banana River Rods Merritt Island, Florida 321~525~1063 * Rapid Prototyping Services * Custom Beach Rods * Custom Inshore Rods [bananariverrods.com] Re: New Sponsor
Posted by:
Gary Goldsmith
(---)
Date: December 18, 2020 08:48PM
Tony, just checked out your website. Nice work. It's funny, I just started a rod with that variegated thread. Did you use CP on it. I've got it from pro wrap but it doesn't specify colorfast. Thanks. Re: New Sponsor
Posted by:
Tony Boschi
(---.res.spectrum.com)
Date: December 21, 2020 09:41AM
Gary Goldsmith Wrote:
------------------------------------------------------- > Tony, just checked out your website. Nice work. > It's funny, I just started a rod with that > variegated thread. Did you use CP on it. I've > got it from pro wrap but it doesn't specify > colorfast. Thanks. Gary, Thanks for the compliments! As per the viriegated wrap, No Color Preserver was used and I used Flex Coat "Lite" before I overcoated everything with the High Build. If its not "colorfast", I haven't really noticed any change whatsoever since its dark and light when it goes on. It always comes out perfect. Tony Boschi Banana River Rods Merritt Island, Florida 321~525~1063 * Rapid Prototyping Services * Custom Beach Rods * Custom Inshore Rods [bananariverrods.com] Sorry, only registered users may post in this forum.
|