SPONSORS
2024 ICRBE EXPO |
7 ft medium heavy fast guides
Posted by:
Gary Goldsmith
(---)
Date: December 01, 2020 11:26AM
Having trouble finding the fuji Kw I want. I found the light duty LZRs that are size 8, 6, 5. Is that too small for a medium heavy bass rod? Re: 7 ft medium heavy fast guides
Posted by:
Gary Goldsmith
(---)
Date: December 01, 2020 11:28AM
It's a casting rod Re: 7 ft medium heavy fast guides
Posted by:
ben belote
(---.zoominternet.net)
Date: December 01, 2020 12:46PM
Looks good for braid.. Re: 7 ft medium heavy fast guides
Posted by:
Joe Vanfossen
(---.neo.res.rr.com)
Date: December 01, 2020 02:42PM
I recently put a set of LZR's on an FP885, 6, 5, 4's to a 5 tip top. Your sizes will work just fine. The LZR's are really nice guides. Re: 7 ft medium heavy fast guides
Posted by:
Tom Kirkman
(Moderator)
Date: December 01, 2020 06:11PM
No idea what a "medium heavy" rod is, but the guide style and size really depends on the line test and type you're using.
.............. Re: 7 ft medium heavy fast guides
Posted by:
Gary Goldsmith
(---)
Date: December 01, 2020 06:17PM
It's between a medium and a heavy power rod. It will be braid or sub 20lbs FC. Re: 7 ft medium heavy fast guides
Posted by:
Harry Glenn
(---)
Date: December 01, 2020 07:20PM
I've used 8, 6, 5s and 8, 6, 4.5s all on 7' mh or h bass rods without issue. Re: 7 ft medium heavy fast guides
Posted by:
Gary Goldsmith
(---)
Date: December 01, 2020 07:26PM
Thanks Harry Re: 7 ft medium heavy fast guides
Posted by:
Aaron Petersen
(12.144.64.---)
Date: December 02, 2020 04:25PM
I have used the 8,6,5's on the MHX NEPS90MHF 7'6" for two different builds now. They have been casting 50lb braid and 15lb Seaguar red label very well. I built one rod using the provided LZR layout guide and it place the butt guide a little further from the reel than I would like it to be. I took some slomo shots with the Gopro casting and the line did not flow as smooth as the one that was built using the concept board to layout the spacing. Edited 1 time(s). Last edit at 12/02/2020 04:26PM by Aaron Petersen. Re: 7 ft medium heavy fast guides
Posted by:
Gary Goldsmith
(---)
Date: December 02, 2020 05:15PM
Thanks. I'm building in an NFC MB 705. I will start with that provided guide spacing and go from there. Sorry, only registered users may post in this forum.
|