SPONSORS
2024 ICRBE EXPO |
Thread for Brown Lamiglas Blank
Posted by:
Jordan Smith
(---.20.114.227.pnnl.gov)
Date: November 03, 2020 03:36PM
Now that salmon season is over, I have a factory XCC 934 in translucent/root beer brown that I need to repair. Does anyone know a good match for the Lamiglas factory brown thread?
Thanks. Edited 2 time(s). Last edit at 11/03/2020 03:50PM by Jordan Smith. Re: Thread for Brown Lamiglas Blank
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: November 03, 2020 05:21PM
Check with Lamiglas, they will likely tell you what it is. Re: Thread for Brown Lamiglas Blank
Posted by:
Spencer Phipps
(---)
Date: November 03, 2020 05:28PM
Jordan,
I don't think there ever was a XCC 934 in brown, all the ones I've been around since 2011 when they came out have been black, including all the glass XCF series that came before, some were also made in 2011. The brown blanks were the Certified Pro graphite rods and the Classic Glass rods. None were 9 ft 3 in though. Re: Thread for Brown Lamiglas Blank
Posted by:
Spencer Phipps
(---)
Date: November 03, 2020 05:44PM
Jordan, misspoke sorry, I was reminded by a friend that in 2013 the blanks came back after missing for a while and they were a translucent bronze, I don't have that catalog. Re: Thread for Brown Lamiglas Blank
Posted by:
Robert Ford
(---)
Date: November 03, 2020 07:38PM
I had to repair one for a friend and used yellow thread,no CP and it came out damn near perfect! The yellow blended in with the blank to make a brown wrap. Re: Thread for Brown Lamiglas Blank
Posted by:
Robert Ford
(---)
Date: November 03, 2020 07:38PM
I would do a tester however to make sure. Re: Thread for Brown Lamiglas Blank
Posted by:
Jordan Smith
(---.res.spectrum.com)
Date: November 04, 2020 09:51AM
Phil: that is great idea. I'll shoot them an email. I probably should have done that first.
Spencer: Yes sir, you even guessed the year of the rod. I've got a couple brown 934s and couple black 802s. Personally, I kind of like brown blanks. It is kind of old school and classy... Robert: Thanks for the interesting idea. I would not have guessed yellow. Do you know happen to know what brand of thread you used? I imagine most brands will behave as you described. Thanks everyone. Re: Thread for Brown Lamiglas Blank
Posted by:
Robert Ford
(---)
Date: November 04, 2020 11:37AM
I used Gudebrod. I just kinda winged it lol. Re: Thread for Brown Lamiglas Blank
Posted by:
Jordan Smith
(---.res.spectrum.com)
Date: November 04, 2020 01:43PM
Thanks Robert. Sounds like it worked. Re: Thread for Brown Lamiglas Blank
Posted by:
Robert Ford
(---)
Date: November 09, 2020 09:55AM
Jordan Smith Wrote:
------------------------------------------------------- > Thanks Robert. Sounds like it worked. It did work and was really close to the original wrap. My friend was happy with it.Hopefully Lamiglas can help you out ! Sorry, only registered users may post in this forum.
|