SPONSORS
2024 ICRBE EXPO |
AFTCO Unibutt size for International 30
Posted by:
Dan Sawyer
(---)
Date: July 09, 2020 02:43PM
Hi folks, I had a quick question about the appropriate AFTCO unibutt size for an original series Penn International 30 (600yds/30lb. test). According to the info, a size 1 unibutt is for 4-30 lb. class rods and a size 2 is for 30-50 lb. class rods. Does anyone have an idea or experience as to which size is a better fit for the International 30? I'm worried about going too small with the size 1 and overkill on the size 2. Any info is much appreciated! Re: AFTCO Unibutt size for International 30
Posted by:
Richard Kline
(---.dyn.optonline.net)
Date: July 10, 2020 07:45AM
Dan:
Built many a 30lb. trolling rod both with roller guides and regular guides for Penn 30 Internationals. Always used a Aftco #2 unibutt , the #30 Internationals fit perfectly. Rich Kline's Custom Rods Re: AFTCO Unibutt size for International 30
Posted by:
Robert A. Guist
(---.inf6.spectrum.com)
Date: July 10, 2020 11:48AM
Hello Dan.
I'm with Richard. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: AFTCO Unibutt size for International 30
Posted by:
Dan Sawyer
(---)
Date: July 13, 2020 12:43AM
Thank you very kindly, gentlemen! It's very much appreciated. Sorry, only registered users may post in this forum.
|