SPONSORS
2024 ICRBE EXPO |
Re: color preserver
Posted by:
ben belote
(---.zoominternet.net)
Date: May 24, 2020 06:38PM
Michael Sutheimer Wrote:
------------------------------------------------------- > I used the current threadmaster chromoseal and > had my problems. ok, sounds like nothing has changed..thanks Michael.. Re: color preserver
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: June 07, 2020 12:17PM
Well, like some of you, I've been stung. My latest build using the old bottle of Roddancer Chromaseal 2 caused my epoxy to be very lumpy ONLY in the areas where the CP was applied. In the areas that were not covered with CP, my epoxy is like glass. I don't recognize any differences of process from previous builds, but there must be something.
That bottle is going into the trash. Re: color preserver
Posted by:
Todd Andrizzi
(---.slkc.qwest.net)
Date: June 09, 2020 10:06AM
I decided to take a chance and bought some flex coat CP. I did the ferrule wrap with 2 coats and then finished it. It turned out real nice. The color changed just slightly but is still pretty bright and acceptable. I am using a bright red color thread and it went to a dark red but looks even better. I will see how the rest goes now. I have all the wraps done and with 2 coats of CP. Will finish them and let you know if I have an issue. Thanks for the comments! Sorry, only registered users may post in this forum.
|