I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Reaming butt caps
Posted by: Chuck Brezen (70.97.209.---)
Date: May 20, 2020 08:59PM

Question... I’ve been building handles for quite awhile now and need some expert opinions. I love building custom grips but when I comes to the butt I feel there must be some tricks you can pass along to make things easier. I have done it 2 ways, by reaming the grip then applying the solid end cap and then reinstall it on my homemade cork lathe by arboring it and shape the cap down to size or... glue up the whole thing and shape it then hand ream to fit from the rear of the blank. I know there has to be some clever ways you folks have figured out. Please share if you would.

Options: ReplyQuote
Re: Reaming butt caps
Posted by: John Cates (---.austin.res.rr.com)
Date: May 21, 2020 10:19AM

Here is how we do it.

[www.youtube.com]

Flex Coat Company
Professional Rod Building Supplies
www.flexcoat.com

Options: ReplyQuote
Re: Reaming butt caps
Posted by: Chuck Brezen (70.97.209.---)
Date: May 21, 2020 05:17PM

That’s pretty much what I’ve been doing. I just wondered if anyone had any lil tweaks they’ve come up with instead of building a new arbor every time...etc. thanks for following up!!

Options: ReplyQuote
Re: Reaming butt caps
Posted by: Michael Sutheimer (---.wi.res.rr.com)
Date: May 24, 2020 04:24AM

You don't say what you are using for material. For my butt I like rubberized cork or eva. Either the whole thing or at least the face of it. I would glue up cork rings with a rubberized ring at the rear or all rubberized cork rings. Now for the arbor no need to make something special each time. Just use a section of threaded rod that fits the grip tight. A washer and a nut on each end. Clamp the grip in place. Mount in your lath or a drill will work if the grip is not very long. Shape as desired. Next ream the grip to fit from the front. You will have a through hole in the grip. Fit the grip on the blank so it extends slightly past the end of the blank 1/8 inch or so. You can buy or make a plug to fill the hole in the butt. Epoxy in place cut flush sand smooth on rubberized cork and eva the plug will be nearly invisible.

Options: ReplyQuote
Re: Reaming butt caps
Posted by: roger wilson (---)
Date: May 24, 2020 10:58AM

To assist you with the technique that Michael mentioned, consider the purchase a set of these inexpensive plug cutters:

[www.harborfreight.com]

I use the method that Michael mentions. i.e. when gluing up a grip, I make the butt end of the grip of the material that I want for the butt cap.

Then, as he mentioned, the entire grip is reamed to size, including the butt cap.

Finally using another piece of the same material used for the butt cap, I insert the appropriately sized plug cutter into my drill press and drill out a couple of plugs

Then, I will use a tapered reamer to slightly taper the hole in the end of the butt cap. With the plug a bit larger than the tapered hole I will slightly shape the matching plug to fit the hole in the butt cap. I coat the plug with epoxy and push it in. The taper on the hole will keep the plug form going in too far. The taper will also allow you to have a very very tight fitting plug in the butt capt that will be invisible when sanded flush.

Best wishes.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster