I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Kokanee spiral wrap for trolling
Posted by: Morris Cross (---.boid.qwest.net)
Date: August 23, 2019 07:59AM

Going to build my first spiral wrap on RDR76L Rainshadow. I would like to know what should be the distance of the first two guides from reel seat intend to have second guide first rotation. Thank you

Options: ReplyQuote
Re: Kokanee spiral wrap for trolling
Posted by: Lance Schreckenbach (200.72.243.---)
Date: August 23, 2019 08:49AM

The placement of the first stripper would be the same as a conventional wrapped rod. With the reel mounted to the reel seat, the first guide (stripper) should be about 21" to 22" from the very front of the reel. The guide spacing of the following guides will depend on the amount of guides you will be using. I use two guides to get the line to the bottom of the blank so the 4th guide from the reel is at 180. This would be a Forhan Revolver style and not a Simple Spiral. The 4th guide should also be behind the major bend of the rod (that's how I do it) so the amount of guides will make a difference.

Options: ReplyQuote
Re: Kokanee spiral wrap for trolling
Posted by: Ron Schneider (---.mid.dyn.suddenlink.net)
Date: August 23, 2019 09:46AM

You may want a larger butt guide, and/or higher frame.
I would use 2 foot for the first 4 guides, butt and next 3 up, turning in 2 guides.
Tape them all on and then mount the reel, run line thru, and put a load to the rod.
The blank will bend almost to the handle under load,
so you need the butt guide high enough to help keep line off the front grip (or hand).
We like 2 ft. sz 16 butt, going to 3 sz 6 2 ft., then size 6 (or smaller) 1 ft on the 180 side.
That seems to be a dependable set-up and works well.
We have done several rods with not only the RDR-"L" series, but also longer UL in "casting" style.
To help keep the line off the front grip,
you may need to get closer to the reel, maybe 16-18" up on the butt guide.
Hope this helps,

Best wishes,
Ron Schneider
Schneider's Rod Shop
Mountain Home, Arkansas
[www.schneidersrods.com]
schndrod@suddenlink.net
870-424-3381

Options: ReplyQuote
Re: Kokanee spiral wrap for trolling
Posted by: Mark Mulanax (---.sub-174-216-31.myvzw.com)
Date: August 24, 2019 11:36AM

I do believe that Batson has a recipe for that rod in the spiral wrap- just look for this on Batsons website their link is on the lefthand side of the page


Saltwater, DownRigger/Trolling

Description
Features
Technology
Blueprints

Click to Download a PDF for RX6/E-Glass Downrigger / Trolling Blueprints!

* Disclaimer, since all rod blanks are handmade there can be minor variations in size of the blanks.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster