SPONSORS
2024 ICRBE EXPO |
roller guide rod
Posted by:
David Parsons
(---.s16300.c3-0.drf-cbr1.atw-drf.pa.cable.rcncustomer.com)
Date: January 22, 2019 09:15AM
I'm building a bent butt rod with a 54.5 inch 50-80 line blank .My question is do I use 4 roller guides or 5 plus tip with regular guides you use enough to keep line off blank .with rollers do you do the same or are you trying to do something else. Re: roller guide rod
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: January 22, 2019 01:00PM
There is a lot of friction when there is a 100 lb pull on the end of the rod. As a result, there is a lot of friction on the line to rod, if the line rubs the blank during a fight.
So, keep the line off the blank. Be safe Sorry, only registered users may post in this forum.
|